Bedienungsanleitung Roland BK-9 (Seite 153 von 180) (Englisch)

527392

153

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

MIDI

153

Tx Shift

This parameter allows you to transpose the note messages before

they are transmitted to an external MIDI instrument or computer.

The maximum possible transposition is four octaves up (+48) or

down (–48).

Each step represents a semi-tone.

Parameter Setting

Tx Shift –48~0~+48

Tx Local

This is where you can disconnect the part from the internal sound

source (“O”) – or re-establish that connection (“On”).

Parameter Setting

Tx Local O, On

Tx Event

The “TX Event” section provides a number of lters that allow you

to specify whether the messages in question should be transmitted

(On) or not (O).

Parameter Setting Explanation

Program Change O, On

Select “On” to transmit program change and

bank select (CC00, CC32) messages.

Pitch Bender O, On Select “On” to transmit Pitch Bend messages.

Modulation O, On

Select “On” to transmit Modulation messages

(CC01).

Volume O, On

Select “On” to transmit Volume messages

(CC07).

Panpot O, On

Select “On” to transmit Panpot messages

(CC10).

Expression O, On

Select “On” to transmit Expression messages

(CC11).

Reverb O, On

Select “On” to transmit Reverb messages

(CC91).

Chorus O, On

Select “On” to transmit Chorus messages

(CC93).

Hold* O, On Select “On” to receive Hold messages (CC64).

Sostenuto* O, On

Select “On” to receive Sostenuto messages

(CC66).

Soft* O, On Select “On” to receive Soft messages (CC67).

Caf* O, On Select “On” to receive Caf Channel aftertouch.

RPN* O, On

Select “On” to receive Registered parameter

number messages (CC100/101).

NRPN* O, On

Select “On” to receive Nonregistered

parameter number messages (CC98/99).

System

Exclusive*

O, On

Select “On” to receive System Exclusive

messages.

Other CC* O, On

General purpose controller and others CC not

listed above.

Select All O, On

Select “On” to transmit all MIDI message listed

above.

* This parameter is available for Tone and Song parts only.

Select “On” if you want the selected part to receive MIDI data.

Parameter Setting

Rx O, On

Rx Ch

Allows you to assign a MIDI receive channel to the selected part.

Parameter Setting

Rx Ch 1~16

Rx Shift

This parameter allows you to transpose the note messages received

from an external MIDI instrument or computer. The maximum

possible transposition is four octaves up (+48) or down (–48). Each

step represents a semi-tone.

Parameter Setting

Rx Shift –48~0~+48

Rx Limit Low/Limit High

“Limit Low” and “Limit High” allow you to set the note range to be

received. If not all note messages received on a given MIDI channel

should be played by the selected BK-9 part, narrow down the range.

Parameter Setting

Rx Limit Low

C–~G9

Rx Limit High

NOTE

The “Limit Low” value cannot be higher than the “Limit High”

value (and vice versa).

Rx Event

The “Rx Event” section provides a number of lters that allow you to

specify whether the messages in question should be received (On)

or not (O).

Parameter Setting Explanation

Program Change O, On

Select “On” to receive program change and

bank select (CC00, CC32) messages.

Pitch Bender O, On Select “On” to receive Pitch Bend messages

Modulation O, On

Select “On” to receive Modulation messages

(CC01).

Volume O, On

Select “On” to receive Volume messages

(CC07).

Panpot O, On

Select “On” to receive Panpot messages

(CC10).

Expression O, On

Select “On” to receive Expression messages

(CC11).

Reverb O, On

Select “On” to receive Reverb messages

(CC91).

Chorus O, On

Select “On” to receive Chorus messages

(CC93).

Hold* O, On Select “On” to receive Hold messages (CC64).

Sostenuto* O, On

Select “On” to receive Sostenuto messages

(CC66).

Soft* O, On Select “On” to receive Soft messages (CC67).

Caf* O, On Select “On” to receive Caf Channel aftertouch.

RPN* O, On

Select “On” to receive Registered parameter

number messages (CC100/101).

NRPN* O, On

Select “On” to receive Nonregistered

parameter number messages (CC98/99).

System

Exclusive*

O, On

Select “On” to receive System Exclusive

messages.

Other CC* O, On

General purpose controller and others CC not

listed above.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 153

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info