Bedienungsanleitung Roland BK-9 (Seite 154 von 180) (Englisch)

527392

154

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Menu options

154

Parameter Setting Explanation

Select All O, On

Select “On” to receive all MIDI message listed

above.

* This parameter is available for Tone and Song parts only.

Edit Tone Parts

The following parameters are located on the display page that can

be selected using [MENU] button “MIDI” “Edit Tone Parts”.

Right Display

1. Use the dial to select the tone part (rst row) you want to

edit (Upper1, Upper2, Lower, M.Bass, Mel.Intell).

The display now shows the settings for the selected part.

Parameter Setting and Explanation

For the explanation of these

parameters please refer to page

152.

Tx Ch

Tx Shift

Tx Local

Tx Event

For the explanation of these

parameters please refer to page

153.

Rx Ch

Rx Shift

Rx Limit Low/High

Rx Event

Edit Song Parts

The following parameters are located on the display page that can

be selected using [MENU] button “MIDI” “Edit Song Parts”.

Right Display

1. Use the dial to select the song part (rst row) you want to

edit (1~16).

The display now shows the settings for the selected part.

Parameter Setting and Explanation

For the explanation of these

parameters please refer to page

152.

Tx Ch

Tx Shift

Tx Local

Tx Event

For the explanation of these

parameters please refer to page

153.

Rx Ch

Rx Shift

Rx Limit Low/High

Rx Event

Edit System

The following parameters are located on the display page that can

be selected using [MENU] button “MIDI” “Edit System”.

Right Display

The “Edit System” group contains the following parameters:

Edit System Explanation

Sync

These parameters are used to synchronize

external MIDI devices. See below.

Basic

The parameters of this group aect the BK-9’s

Basic channel. The Basic channel is used to receive

and transmit Program Change and Bank Select

messages for selecting Performances as well as for

the reception and transmission of other kinds of

messages that are not directly related to a specic

MIDI channel. See p. 155.

Rhythm

The parameters of this group aect the BK-9’s

Rhythm channel. The Rhythm channel is used for

receiving program change and bank select mes-

sages that select rhythm and volume messages

that change the rhythm’s volume. See p. 156.

NTA

These parameters allow you to assign MIDI chan-

nels to the BK-9’s NTA parts (Notet-to-Arranger).

Only notes received on one of these channels are

considered chord information that can be used

to transpose rhythm playback in real-time. See

p. 157.

Parameters

This group contains MIDI parameters that are not

related to the previous groups. See p. 157.

Visual Control TxCh

Allows you to set the MIDI transmit channel for

the Visual Control function. (The BK-9 does not

receive Visual Control messages). See p. 158

Sync

The following parameters are located on the display page that can

be selected using [MENU] button“MIDI”  “Edit System” “Sync”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 154

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info