Bedienungsanleitung Roland BK-9 (Seite 156 von 180) (Englisch)

527392

156

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Menu options

156

Parameter Setting

Performance PC Tx O, On

Part Switch Tx

Whenever you mute or un-mute a part on the “Rhythm Parts” page,

the BK-9 transmits an NRPN message that describes your action.

Not sending this message may be useful to keep your external

sequencer from recording it—or the receiving GS module from

muting the part assigned to that MIDI channel.

Parameter Setting

Part Switch Tx O, On

Switches the reception of MIDI messages on the Basic channel on

or o.

Parameter Setting

Rx O, On

Rx Channel

Use this parameter to assign a MIDI transmit channel to the “Basic”

channel.

Parameter Setting

Rx Channel 1~16

Performance PC Rx

This parameter is used to enable or disable the reception of

program change and bank select messages related to Performance

selection.

Parameter Setting

Performance PC Rx O, On

Master Volume Rx

Allows you to enable or disable the reception of Master Volume

messages that would change the BK-9’s overall volume. This is an

exclusive message common to all newer MIDI devices.

Parameter Setting

Master Volume Rx O, On

Part Switch Rx

Whenever you mute or un-mute a part on the “Rhythm Parts” page,

the BK-9 transmits an NRPN message that describes your action.

You can keep the BK-9 from responding to such messages to avoid

that external instruments mute its parts.

Parameter Setting

Part Switch Rx O, On

Rhythm

The following parameters are located on the display page that

can be selected using [MENU] button  “MIDI” “Edit System”

“Rhythm”.

Right Display

The Rhythm channel is used for receiving program change and

bank select messages that select rhythms and volume messages

that change the rhythm’s volume.

The MIDI address of a rhythm consists of three elements: a CC00

number, a CC32 number and a program change number. The

values assigned to CC00 and CC32 dene the rhythm, whereas

the program change number denes the Division (Intro, Ending,

etc.). See the “Rhythm List“. You can download it from http://www.

roland.com/manuals.

Sending only a program change number selects another Division of

the currently active rhythm. Be aware, however, that only sending

CC00 and CC32 messages (without a program change) has no

eect.

NOTE

When you select another rhythm on your BK-9, it transmits a

CC00-CC32-PC cluster on the Rhythm channel, which you could

record using an external sequencer.

See the “Rhythm List”.

You can download it from http://www.roland.com/manuals.

Switches the transmission of MIDI messages on the Rhythm

channel on or o.

Parameter Setting

Tx O, On

Tx Channel

The channel used to transmit MIDI messages.

Parameter Setting

Tx Channel 1~16

Switches the reception of MIDI messages on the Rhythm channel

on or o.

Parameter Setting

Rx O, On

Rx Channel

Use this parameter to assign a MIDI receive channel to the Rhythm

section.

Parameter Setting

Rx Channel 1~16

Rhythm Volume Rx

Allows you to enable or disable the reception of volume messages

relating the rhythm.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 156

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info