Bedienungsanleitung Roland BK-9 (Seite 157 von 180) (Englisch)

527392

157

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

MIDI

157

Parameter Setting

Rhythm Volume Rx O, On

Rhythm Pc Rx

This parameter allows you to enable or disable the reception of

program change and bank select messages for rhythm selection.

Parameter Setting

Rhythm Pc Rx O, On

NTA

The following parameters are located on the display page that can

be selected using [MENU] button  “MIDI”  “Edit System”  “NTA”.

Right Display

NTA notes are only received (from an external MIDI instrument).

What you play in the chord recognition area of the keyboard to

feed the Arranger is automatically converted to the corresponding

MIDI note numbers, so that all rhythm parts transmit their notes

to external instruments. There is thus no need to transmit the note

messages of what you play in the chord recognition area (NTA)

separately.

These parameters allow you to specify on which MIDI channels the

BK-9 should receive chord information used to change the rhythm’s

key in real-time.

Channel

Allows you to select the MIDI channel on which the BK-9 should

receive NTA messages.

Parameter Setting

Channel Ch1~Ch16

This parameter allows you to specify whether (“On”) or not (“O”)

the selected MIDI channel should be used to receive chord

information.

Parameter Setting

Rx O, On

Rx Octave

Use this parameter to transpose the notes received on the selected

MIDI channel (“Ch”) in steps of one octave.

Parameter Setting

Rx Octave –4~0~4

Rx Global Limit Low/High

These parameters allow you to set the note range to be received.

If not all note messages of the selected MIDI channel should be

received by the NTA “part”, set the range to the desired values

Parameter Setting

Rx Global Limit Low

C–~G9

Rx Global Limit High

NOTE

The “Limit Low” value cannot be higher than the “Limit High”

value (and vice versa).

Parameters

The following parameters are located on the display page that

can be selected using [MENU] button  “MIDI”  “Edit System”

 “Parameters”.

Right Display

This page contains several parameters that are not related to

one another (the other MIDI pages always concentrate on one

aspect).

Part Switch

This parameter allows you to specify whether or not a muted

part should go on sending MIDI messages:

Parameter Setting

Part Switch Internal, Int+MIDI

• Internal: A muted part can no longer be played via the BK-9’s

keyboard or Arranger/song player but continues to send MIDI

messages. Selecting “Internal” and muting a part thus has the

same eect as selecting “Local O” (see p. 152).

• Int+MIDI: A muted part can no longer be played via the BK-9’s

keyboard or Arranger/song player and no longer sends MIDI

messages.

Tx Velocity

Your BK-9 is equipped with a velocity-sensitive keyboard and a tone

generator capable of responding to velocity messages. Use this

parameter to switch the transmission (TX) of velocity messages on

or o.

If you don’t select “On”, specify which velocity value to use instead

of the continuous ux. The value you set will be used for all notes

sent to MIDI OUT/USB COMPUTER.

Parameter Setting

Tx Velocity On, 1~127

Tx SysEx

Use this parameter to specify whether (“On”) or not (“O”) the BK-9

should send SysEx messages. Such messages are not standardized,

so that each manufacturer can use them ad lib for temporary (or

permanent) changes to the way a part behaves. Eects parameters,

for instance, can only be changed via SysEx messages.

Such messages may slow down playback on external

MIDI instruments or yield no eect at all, which is why you have the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland BK-9 Seite 157

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland BK-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info