527431
71
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
71
Other Settings
Here you can make various settings for the organ’s MIDI
functionality.
For more about MIDI, refer to “Connecting to MIDI Equipment” (p.
76).
1.
Press the [Select/Menu] knob.
2.
Turn the [Select/Menu] knob to select “10 MIDI.”
fig.LCD011.eps
3.
Press the [Select/Menu] knob to access the “MIDI” screen.
4.
Turn the [Select/Menu] knob to select the item that you
want to set, and turn the [Value/Exit Menu] knob to
change the setting.
fig.LCD075.eps
5.
Press the [Value/Exit Menu] knob twice to return to the
main screen.
When the organ is connected to a MIDI sequencer, change this
setting to Local Off.
Since the “Thru” function of most sequencers is turned on, the notes
played on the keyboard or played back by the recorder will reach
the sound generator section by the two routes shown as (1) and (2),
causing duplicate notes to be sounded or notes to be cut off
prematurely. To prevent this from happening, you can use the
“Local Off” setting so that route (1) is disconnected.
Local On:
In this state, the keyboard is connected to the internal sound
generator.
Local Off:
In this state, the keyboard is not connected to the internal sound
generator.
No sound will be heard when you play the keyboard.
This setting will return to “Local ON” when you turn off the
power.
MIDI Settings
Item
Explanation Value
Local
Turns the Local Control setting
on/off (p. 71).
ON, OFF
Tone Name Displays the tone name (p. 72).
OFF, MX200,
GM2
TX Piston
Specifies the MIDI output data
format for the general memory
pistons (p. 72).
OFF, STOP MAP,
PC
Local Control Setting (Local)
Value
Explanation
ON
Local On: the keyboard is onnected to the internal
sound generator.
OFF
Local Off: the keyboard is disconnected from the
internal sound generator. No sound will be heard when
you play the keyboard or play back a song.
(1)
MIDI
MIDI
MIDI
MIDI
(2)
IN
IN
OUT
OUT
Sequencer
Memory
Sound
Generator
Each note played is sounded twice
Soft Thru On
Local On
Local On
Sound is emitted
Sound Generator
Local Off
No sound produced
Sound Generator
C-380_330_e.book 71 ページ 2010年4月28日 水曜日 午後10時11分
71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland C-330 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland C-330

Roland C-330 Bedienungsanleitung - Deutsch - 96 seiten

Roland C-330 Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info