Bedienungsanleitung Roland C-330 (Seite 72 von 96) (Englisch)

527431

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Other Settings

When using an [USER/MIDI] coupler with an MX-200 or GM2-

compatible external MIDI sound module, you can make the sound

names of your MX-200 or GM2-compatible sound module appear in

the “USER/MIDI” screen.

* If you’re using a MIDI sound module that does not support GM2,

choose the “OFF” setting.

* This setting will return to “MX200” when you turn off the power, but

you can store the setting so that it will be remembered even after

the power is turned off. For details, refer to “Storing Your Settings

(Customize)” (p. 73).

When transmitting performance data via MIDI, you can specify the

type of MIDI data that will be transmitted when you press a general

memory [1]–[5] piston.

* This setting will return to “STOP MAP” when you turn off the power,

but you can store the setting so that it will be remembered even

after the power is turned off. For details, refer to “Storing Your

Settings (Customize)” (p. 73).

All settings stored in the organ can be reset to their factory-set

condition. This operation is called “Factory Reset.”

Factory reset will cause all of the recorded songs, the general

memory pistons, and division memory pistons (C-380 only) to

return to their factory settings. Please copy your settings to

USB memory before you proceed.

➔

“Saving a Recorded Song” (p. 57)

➔

“Saving and Loading Memory Banks” (p. 62)

From the main screen, press the [Select/Menu] knob.

Turn the [Select/Menu] knob to select “11 Save/Load

(USB).”

fig.LCD012.eps

Press the [Select/Menu] knob to access the “Save/Load

(USB)” screen.

Turn the [Select/Menu] knob to select “Factory Reset.”

fig.LCD061.eps

Press the [Select/Menu] knob.

Confirmation screen will appear

fig.LCD962.eps

If you decide to cancel, press the [Value/Exit Menu] knob.

Specifying the Type of External MIDI Sound

Module (Tone Name)

Value Explanation

OFF

Tone name will not show.

MX200

The screen will show the name of the MX-200’s sound

if an MX-200 is connected as an external MIDI sound

module.

GM2

The screen will show the name of the GM2 sound if a

GM2-compatible sound module is connected as an

external MIDI sound module.

Specifying the MIDI Data Output format for

the General Memory Pistons (Tx Piston)

Value

Explanation

OFF MIDI data will not be transmitted.

STOP MAP

Data describing the details of the sounds that should

be produced when that piston is pressed will be

transmitted. If you’re recording your performance into

a MIDI sequencer, this will ensure that the sounds are

reproduced accurately.

However, since a large amount of data is transmitted

when you press the piston, the sounding of the first

note-on after you press the piston may be delayed in

some cases.

Only program changes indicating the current memory

bank and the general memory piston that was pressed

will be transmitted.

If you’re recording your performance into a MIDI

sequencer, the performance will not be accurately

reproduced unless the contents of the memory bank

used during the performance match the contents

during recording (for example, if you’ve saved the

settings to USB memory).

However, since a large amount of data will not be

transmitted when you press the piston, there will be no

significant delay in the first note-on after you press the

piston.

Returning all Settings to the

Factory-Set State (Factory Reset)

C-380_330_e.book 72 ページ２０１０年４月２８日　水曜日　午後１０時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland C-330 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland C-330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info