Bedienungsanleitung Roland CD-2 (Seite 85 von 96) (Englisch)

527439

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Reference

■ CD-Related Problems (continued)

■ CF Card-Related Problems

Problem Cause and Action

See

Page

Can’t record (continued) ● Are you using a generic CD-R/RW disc?

➔ Use a CD-R/RW disc from a recommended manufacturer.

After recording, the CD

won’t play back on a

conventional CD player

● Did you finalize the disc after recording?

➔ Execute the Finalize operation.

● Is your CD player able to play back CD-R or CD-RW discs?

➔ If your CD player does not support CD-R or CD-RW discs, they may not play back

correctly.

—

SMF data written to a

CD-R/RW disc is not

recognized

● Could the filename contain double-byte (e.g., Japanese) characters?

➔ Filenames containing double-byte (e.g., Japanese) characters will not be

recognized.

—

The disc tray will not open ● Is the CD-2 powered up?

➔ Turn on the power of the CD-2.

If a power failure has occurred, you can use the emergency eject hole to open the

disc tray manually.

CD-R/RW drive produces

significant mechanical

noise when operating

● Could you be using a high-speed compatible CD-RW disc?

➔ If you’re using a high-speed compatible CD-RW disc, performing the following

operations will cause the disc to rotate at high speed, producing a greater level of

mechanical noise. This is not a malfunction.

• When you stop recording • When you assign a song number

• When you delete a track • When you finalize

If you find the mechanical operating noise of the CD-R/RW drive objectionable,

please use an 8x compatible CD-R disc or a 1-4x compatible CD-RW disc.

—

Problem Cause and Action

See

Page

The CF card is not

detected

● Could the CF card be of a capacity that is not supported?

➔ Check the capacity of the CF card, and use a card of a capacity supported by the

CD-2.

● Is the CF card inserted all the way into the slot?

➔ Make sure that the card is oriented correctly, and that it is pushed all the way into

the slot.

● Could you have turned off the power while recording, or could the CF card have

been subjected to strong impact?

➔ It is possible that the data has been damaged. Reformat the CF card.

The CF card won’t play

back

● Could you have inserted a CF card on which nothing has been recorded?

➔ Insert a different CF card.

—

● Could you be using Repeat playback?

➔ Press [1/ALL] enough times to turn off the Repeat icon ( / ).

● Could you be using A-B Repeat playback?

➔ Press [A-B] to get the A-B Repeat icon ( ) to disappear.

➔ Alternatively, press the CF card [Stop ( )] to stop playback. A-B Repeat playback

will be defeated.

● Is the CF card [Play ( )] button blinking?

➔

If the button is blinking, the CF card is paused. Press [Play ( )] to defeat pause.

Troubleshooting (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CD-2 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CD-2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info