Bedienungsanleitung Roland DJ-505 (Seite 19 von 32) (Englisch)

710374

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-505

Changing Instruments/Kits

Changing the entire kit of instrument sounds

You can use twelve kits.

1. Hold down the [SHIFT] button and press the [INST] button to

make it blink.

2. Press the TR-S pad [1]–[12] to select the kit 1–12.

The TR-S pad that you pressed is blinking.

Changing the sound of an individual instrument

MEMO

When you change sounds, the change is automatically saved in the

settings of the currently selected kit.

1. Press the [INST] button to make it light.

2. Hold down one of the TR-S pads [1] (BD)–[8] (RC) and turn the

[VALUE] knob.

The display shows the selected sound.

Operation Display Explanation

[1] (BD) + [VALUE] knob

80.bd

TR-808 bass drum

90.bd

TR-909 bass drum

80.b1

TR-808 bass drum (long decay)

70.bd

TR-707 bass drum

60.bd

TR-606 bass drum

[2] (SD) + [VALUE] knob

80.Sd

TR-808 snare drum

90.Sd

TR-909 snare drum

70.Sd

TR-707 snare drum

60.Sd

TR-606 snare drum

[3] (CH) + [VALUE] knob

80.Ch

TR-808 closed hi-hat

90.Ch

TR-909 closed hi-hat

70.Ch

TR-707 closed hi-hat

60.Ch

TR-606 closed hi-hat

[4] (OH) + [VALUE] knob

80.Oh

TR-808 open hi-hat

90.Oh

TR-909 open hi-hat

70.Oh

TR-707 open hi-hat

60.Oh

TR-606 open hi-hat

[5] (LT) + [VALUE] knob

80.Lt

TR-808 low tom

90.Lt

TR-909 low tom

70.Lt

TR-707 low tom

60.Lt

TR-606 low tom

[6] (HC) + [VALUE] knob

80.Hc

TR-808 hand clap

90.Hc

TR-909 hand clap

70.Hc

TR-707 hand clap

[7] (RS) + [VALUE] knob

80.rs

TR-808 rim shot

90.rs

TR-909 rim shot

70.rs

TR-707 rim shot

[8] (RC) + [VALUE] knob

80.Cb

TR-808 cowbell

90.rc

TR-909 ride cymbal

70.rc

TR-707 ride cymbal

60.CY

TR-606 cymbal

Changing all instruments to the sounds of a specic model

In a single operation, you can change the instruments of a kit to the

sounds of a specic model of rhythm machine (either the TR-808, TR-909,

TR-707, or TR-606).

MEMO

When you change sounds, the change is automatically saved in the

settings of the currently selected kit.

1. Hold down the [SHIFT] button and press the [INST] button to

make it blink.

2. While holding down the TR-S pad of the kit whose instruments

you want to change, turn the [VALUE] knob to select the

desired sounds.

Display (Value) Explanation

TR-808 sounds

TR-909 sounds

TR-707 sounds

TR-606 sounds

Adjusting the sound of an instrument

MEMO

When you change sounds, the change is automatically saved in the

settings of the currently selected kit.

Operation Explanation

[LEVEL] knob

Adjusts the volume of the selected instrument.

Value:

–

100

[ATTACK] knob

Adjusts the strength of the attack if the TR-S pad [1] (BD) is selected,

or adjusts the sound of the snare rattle if the TR-S pad [2] (SD) is

selected.

Value:

–

100

[TUNE] knob

Adjusts the tuning (pitch) of the selected instrument.

Value:

–

100

[DECAY] knob

Adjusts the decay length of the selected instrument.

Value:

–

100

Specifying eects for a kit

Dedicated eects of the TR-S can be specied for each kit.

MEMO

When you specify an eect, it is automatically saved within the settings

of the currently selected kit.

1. Hold down the [SHIFT] button and press the [INST] button or

[PATTERN] button to make it blink.

2. Use the following knobs to specify the eects.

Operation Eects Explanation

[ATTACK] knob COMPRESSOR

Makes the overall volume more consistent.

Value:

–

100

[TUNE] knob DRIVE

Produces distortion.

Value:

–

100

[DECAY] knob TRANSIENT

Gives the sound sharper denition by boosting the

attack and suppressing the decay.

Value:

–

100

Copying a kit

1. Hold down the [SHIFT] button and press the [INST] button to

make it blink.

2. Hold down the [SHIFT] button and press one of the TR-S pads

[1]–[12] to select the copy-source kit.

TR-S pads that you can select as a copy-destination are blinking yellow.

* If you decide to cancel the operation, press the [PATTERN] button or

[TR-REC] button.

3. Press one of the blinking TR-S pads [1]–[12] to select the copy-

destination kit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-505 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info