Bedienungsanleitung Roland DJ-808 (Seite 13 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

Performance Pad Operations

Hot Cue Operations (HOT CUE)

By specifying a hot cue, you can instantly play back from the specied

location.

You can specify up to eight hot cues for each song.

1. Press a [HOT CUE] to make the button light in white.

Hot cue mode is selected.

2. During playback or while paused, press a performance pad

that is unlit.

A hot cue is assigned to the pad that you pressed.

Hot cues (1–8) are assigned to the performance pads as follows.

HOT CUE

3. Press a performance pad that is lit (i.e., a pad to which a hot cue

is assigned).

Playback starts from the specied location.

MEMO

If you hold down the [SHIFT] button and press a performance pad, the

hot cue of the pad you pressed is cleared.

Cue Loop Operations (CUE LOOP)

When you press a performance pad, the auto loop point moves to the cue

point of the pad that you pressed, and auto loop playback occurs.

1. Hold down the [SHIFT] button and press the [HOT CUE] button

to make the button light in blue.

Cue loop mode is selected.

2. During playback, press a performance pad that’s lit.

Auto loop playback starts with the hot cue that’s assigned to the pad you

pressed.

The loop length is the same as the auto loop beat setting.

MEMO

If you press a pad that’s unlit, hot cue is specied, and auto loop

playback starts immediately.

Loop in points are assigned to the performance pads as follows.

Loop 1 Loop 2 Loop 3 Loop 4

Loop 5 Loop 6 Loop

7 Loop 8

3. Adjust the loop playback parameters.

5 During loop playback, press the PARAMETER [−] button

The loop playback length is halved.

You can obtain the same result by pressing the [1/2X] button in the

LOOP area.

5 During loop playback, press the PARAMETER [+] button

The loop playback length is doubled.

You can obtain the same result by pressing the [2X] button in the LOOP

area.

5 During loop playback, hold down the [SHIFT] button and press the

LOOP [1/2X] button

Move to the previous loop, keeping the loop length the same.

5 During loop playback, hold down the [SHIFT] button and press the

LOOP [2X] button

Move to the next loop, keeping the loop length the same.

5 Hold down the [SHIFT] button and press the same performance pad

Return to the loop in point and continue loop playback.

4. Press the same performance pad once again.

Loop playback is cancelled.

Roll Operations (ROLL)

When you press a performance pad, a roll continues playing in time with

the length (beat) that’s assigned to each pad, as long as you continue

holding down the pad.

The song continues progressing in the background even while the roll is

playing.

When you cancel roll playback, song playback resumes from the location to

which the song had progressed while the roll was being played.

NOTE

Roll can only be used during the song playback.

1. Press the [ROLL] button to make the button illuminate in light

blue.

Roll mode is selected.

2. Use the PARAMETER [−] [+] buttons to select the lengths

(beats) that are assigned to the pads.

Each time you press a button, you cycle through four sets.

1/32 beat 1/16 beat 1/8 beat 1/4 beat

1/2 beat 1 beat 2 beats 4 beats

1/16 beat 1/8 beat 1/4 beat 1/2 beat

1 beat 2 beats 4 beats 8 beats

1/8 beat 1/4 beat 1/2 beat 1 beat

2 beats 4 beats 8 beats 16 beats

1/4 beat 1/2 beat 1 beat 2 beats

4 beats 8 beats 16 beats 32 beats

The computer screen shows the selected set.

3. Hold down a performance pad.

A roll plays at the beat that’s assigned to the pad you pressed.

MEMO

During roll playback, you can press the LOOP [1/2X] button or LOOP [2X]

button to change the beat of the currently-playing roll.

4. Take your nger o the performance pad.

Song playback resumes from the location to which the song had

progressed while the roll was being played.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info