Bedienungsanleitung Roland DJ-808 (Seite 15 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

Pattern Operations (PATTERN)

You can press the performance pads to switch TR-S patterns (p. 18).

1. Hold down the [SHIFT] button and press the [TR] button to

make the button light in green.

Pattern mode is selected.

Patterns are assigned to the performance pads as follows.

Pattern

Press the [SHIFT] button to select patterns 9–16.

Pattern

2. Press a performance pad, or hold down the [SHIFT] button and

press a performance pad.

The pattern assigned to the pad you pressed starts playing.

TR Velocity Operations

The functionality is the same as in TR mode, but when you press a pad in

the upper row, the volume of the instrument changes depending on how

strongly you press the pad.

1. Press the [TR] button twice to make the button light in orange.

TR velocity mode is selected.

BD SD CH OH

Roll

2. Press or hold down a performance pad.

5 When you press a pad in the upper row, the instrument plays. The

volume of the instrument changes depending on how strongly

you press the pad. The stronger you press the pad, the louder the

instrument’s volume.

5 While you hold down a pad in the lower row, the instrument plays a

roll. The spacing of the roll depends on how strongly you press the pad.

The more strongly you press the pad, the shorter the spacing between

strikes of the roll.

Serato Sampler Operations (SAMPLER)

You can use the performance pads to play songs (samples) that are loaded

into Serato Sampler’s sample slots.

1. In the browser section, press the [PANEL] button several times

so that the Sampler panel appears in Serato DJ’s screen.

2. Press the [SAMPLER] button to make it light in magenta.

Sampler mode is selected.

3. Use the PARAMETER [−] [+] buttons to switch the Serato

Sampler’s banks.

The Serato Sampler has four banks (A–D), and each bank has eight slots.

4. Drag and drop songs into the Sampler panel to load a sample

into each slot of the Sampler panel.

The sampler settings and the loaded samples are saved.

5. Press a performance pad.

The sample of the slot that’s assigned to the pad you pressed is played.

Slot 1 Slot 2 Slot 3 Slot 4

Slot 5 Slot 6 Slot 7 Slot 8

* The type of playback changes depending Serato Sampler’s playback

mode. For details, refer to the Serato DJ owner’s manual.

MEMO

If you hold down the [SHIFT] button and press the performance pad,

sample playback stops.

Pitch Play Operations (PITCH PLAY)

The pitch of the loaded song can be changed in semitone steps.

In order to use pitch play, you’ll need to activate Pitch’n Time DJ.

Following the procedure given on the included Serato DJ

EXPANSION PACK VOUCHER card, enter the voucher code (listed on

the card) to activate Pitch’n Time DJ.

1. Hold down the [SHIFT] button and press the [SAMPLER] button

to make the button light in green.

Pitch play mode is selected.

2. Press a performance pad to change the pitch.

change

Semitone

down

Pitch is raised in semitone steps

Pitch is lowered in

semitone steps

Velocity Sampler Operations

The functionality is the same as in sampler mode, but when you press a

pad, the sample’s playback volume changes depending on how strongly

you press the pad.

1. Press the [SAMPLER] button twice to make the button light in

purple.

Velocity sampler mode is selected.

2. Press a performance pad.

The sample of the slot assigned to the pad you press is played.

The more strongly you press the pad, the louder the sample’s playback

volume.

Slip Operations

If slip is on, the song continues to progress in the background even during

scratch play, loop playback, or hot cue playback.

When you cancel scratch play, loop playback, or hot cue playback, the song

playback resumes from the position to which playback had progressed

until that time.

This allows a variety of DJ performance techniques without stopping the

ow of the song.

1. Press the [SLIP] button to make the button light.

Slip mode is selected.

The button blinks while the song is progressing in the background.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info