Bedienungsanleitung Roland DJ-808 (Seite 16 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

Dual Deck Mode Operations

Dual deck mode is a function that lets you simultaneously control both

decks when using decks 1/3 or decks 2/4 to mix two songs.

1. Hold down the [DECK 1] ([DECK 2]) button and press the [DECK

3] ([DECK 4]) button.

* The order in which you press the buttons does not matter.

Dual deck mode turns on; the [DECK] button you pressed rst is blinking,

and the [DECK] button you pressed later is lit.

The deck indications (the illumination color of the performance pads and

buttons) show the status of the deck whose [DECK] button you pressed

rst.

2. To exit dual deck mode, press the [DECK 1] ([DECK 2]) button or

[DECK 3] ([DECK 4]) button.

Dual deck mode turns o, and the [DECK] button is lit.

The deck switches to the deck of the [DECK] button.

Functions that can be controlled in dual deck mode

Controller Function

Jog dial Scratch, pitch bend, skip mode, slip scratch

[SLIP] button Slip mode, VINYL mode

[AUTO LOOP] button Auto loop, loop active, slip auto loop

LOOP [1/2X] button

Select auto loop beat, change loop length, move loop

LOOP [2X] button

LOOP [IN] button Loop in, change loop in point, select loop slot, slip manual loop

LOOP [OUT] button Loop out, Change loop out point, re-loop/exit, slip manual loop

[HOT CUE] button Hot cue mode, Cue loop mode, Saved ip mode

[ROLL] button Roll mode, Slicer mode, Saved loop mode

[TR] button TR mode, Pattern mode, TR velocity mode

[SAMPLER] button Sampler mode, Pitch play mode, Velocity sampler mode

Performance pads All performance pad operations

PARAMETER [–] [+] buttons

Select loop roll beat, specify length of region and quantize setting

for slicer, change loop length, move loop

[

r] button

Play, pause, slip braking

[CUE] button Cue settings, back cue, cue sampler

[SYNC] button Sync, sync o

[CENSOR] button Censor, reverse

[KEY SYNC] button Key sync, key lock

[UP], [DOWN] buttons Key sync key setting, key lock range setting

Song Analysis

Song analysis begins when you press the DJ-808’s [LOAD] button to load

a song into a deck, but if you’re using Serato DJ as an oine player (i.e.,

without the DJ-808 being connected), you can analyze songs ahead of

time.

If analysis is nished for a song, the BPM and waveform are displayed

immediately after you load that song into a deck.

For details on how to analyze songs with the oine player, refer to the

Serato DJ owner’s manual.

* Depending on the number of songs, analysis might take some time.

Eect Operations

Serato DJ has two eect units (FX1, FX2) which you can use with the

selected deck.

DJ-FX panel

When you click “FX” in the upper left of Serato DJ’s main screen, the DJ-FX

panel opens.

Multi FX mode

You can select up to three eects for each eect unit.

1 1 1 2 3

4 5 4 5 4 5

Single FX mode

You can select one eect for each eect unit, and control multiple

parameters of the selected eect.

2 3

4 5 6 6 6 6

Currently selected eect type

Time at which the eect is applied

Number of the deck that uses the eect unit is highlighted

Eect on/o status (highlighted when on)

Eect depth

Eect parameters and settings

Multi FX Mode Operations

1. Hold down the [SHIFT] button and press the [TAP] button to

select multi FX mode.

Each time you press the button, you alternate between multi FX mode

and single FX mode.

2. Press the [1] or [2] button of the deck (channel) that you want

to operate, to select the eect unit that will be used.

In the DJ-FX panel of the Serato DJ screen, the number of the deck that

uses the eect unit is highlighted.

3. Hold down the [SHIFT] button and press an eect button to

select the eect type.

The eect type changes each time you press the button.

4. Press the eect button to turn the eect on (button lit).

5. Use the eect parameter knobs to adjust the eect depth.

6. Use the [BEATS] knob to adjust the time at which the eect is

applied.

* If you press the knob, the setting is set to “1.”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info