Bedienungsanleitung Roland DJ-808 (Seite 17 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Single FX Mode Operations

1. Hold down the [SHIFT] button and press the [TAP] button to

select single FX mode.

Each time you press the button, you alternate between single FX mode

and multi FX mode.

2. Press the [1] or [2] button of the deck (channel) that you want

to operate, to select the eect unit that will be used.

In the DJ-FX panel of the Serato DJ screen, the number of the deck that

uses the eect unit is highlighted.

3. Hold down the [SHIFT] button and press the eect button to

select the eect type.

It does not matter which eect button you press.

The eect type changes each time you press the button.

4. Press the eect 1 button to turn the eect on (button lit).

5. Press the eect 2 or 3 button to switch the value of the eect

parameters.

6. Use the eect parameter 2 or 3 knobs to adjust the value of the

eect parameters.

7. Use the eect parameter 1 knob to adjust the eect depth.

8. Use the [BEATS] knob to adjust the time at which the eect is

applied.

* If you press the knob, the setting is set to “1.”

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Changing the Eect Tempo

Serato DJ lets you set the tempo of the eect in either of two ways.

Auto tempo mode (default setting)

The eect tempo is determined based on the BPM value of the song.

Manual tempo mode

The basic tempo (BPM value) for the eect is set by the interval at which

you tap the [TAP] button.

Switching the tempo mode

5 In auto tempo mode, tap the [TAP] button three or more times to

switch to manual tempo mode.

5 In manual tempo mode, long-press the [TAP] button to reset the

specied tempo and switch to auto tempo mode.

Recording

You can use Serato DJ’s recording functionality to record sounds that

you’ve mixed on the DJ-808.

* For details, refer to the Serato DJ owner’s manual.

1. In the browser section, press the [PANEL] button to open the

REC panel.

2. Click [REC] to start recording.

3. To stop recording, click [REC] once again.

4. To save, enter a le name in the text entry eld and click [Save].

Inputting Sound from an External Device

Audio from devices such as a DJ player or turntable (analog) can be input

directly to the rear panel INPUT (CH 1–CH 4) jacks, and mixed by the DJ-

808’s mixer section.

You can also use Serato DJ’s eect units to apply eects to the external

audio inputs.

You can use the VT section to apply a voice eect to the audio input from a

mic connected to the MIC IN jack.

Inputting Sound from a DJ Player

1. Connect your DJ player or other line-level device to any of the

INPUT (CH 1–CH 4) jacks.

2. As appropriate for the channel to which your line-level device

is connected, set the corresponding front panel [INPUT

SELECT] switch to “LINE.”

3. Use the [TRIM] knob and channel fader to adjust the output

level.

5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of

the high, mid, and low-frequency regions.

5 You can use the [CHANNEL FX] buttons to apply eects.

5 You can operate the eect section to apply Serato DJ’s eects.

Inputting Sound from a Turntable

1. Connect your turntable to either of the INPUT jacks (CH 1 or CH

2).

2. As appropriate for the channel to which your turntable is

connected, set the front panel [INPUT SELECT] switch to

“PHONO.”

3. Use the [TRIM] knob and channel fader to adjust the output

level.

5 You can use the [HI], [MID], and [LOW] knobs to adjust the volume of

the high, mid, and low-frequency regions.

5 You can use the [CHANNEL FX] button to apply eects.

5 You can operate the eect section to apply Serato DJ’s eects.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info