Bedienungsanleitung Roland DJ-808 (Seite 18 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

Inputting Sound from a Mic

1. Connect your mic to the MIC IN jack.

2. Set the VT section’s mic switch to “ON” or “DUCK.”

3. Use the rear panel [MIC SENS] knob to adjust the mic input

sensitivity.

4. Use the VT section’s [LEVEL] knob to adjust the audio output

level of the mic.

5 You can use the VT section’s [HI] and [LOW] knobs to adjust the volume

of the high and low-frequency regions.

5 You can operate the VT section to apply a voice eect.

TR-S Operations

You can play and create patterns using the sounds of the Roland TR-909/

TR-808/TR-707/TR-606 rhythm machines.

You can also create patterns using the samples of Serato DJ.

What are instruments?

These are the drum sounds of the TR-S section, consisting of BD (BASS

DRUM), SD (SNARE DRUM), CH (CLOSED HIHAT), and OH (OPEN HIHAT).

Each instrument can be changed to the desired sound.

What are patterns?

Instrument performance data that you record using TR-REC (step

recording) or INST REC (realtime recording) is called a “pattern.”

The TR-S section lets you create and save 16 patterns.

Playing, Copying, or Deleting Patterns

Playing patterns

1. Press the [PATTERN] button to make it light.

2. Press a TR-S pad [1]–[16] to select the pattern that you want to

play.

The TR-S pad that you pressed is lit.

5 You can select a range of patterns by pressing two TR-S pads

simultaneously. The selected patterns play consecutively.

3. Press the [START/STOP] button.

The pattern starts playing.

5 If you select the next pattern during playback, the TR-S pad that you

pressed blinks.

Changing the groove (SHUFFLE)

You can adjust the shue (the feel of rhythmic bounce).

You can create shue rhythms by adjusting the timing at which

backbeats of the pattern are heard.

1. Press the [SHUFFLE] button and then use the [VALUE] knob to

adjust the timing of the notes.

Display (Value) Explanation

-50

–

Higher values delay the timing of the notes correspondingly, and lower

values advance the timing.

Varying the playback of the pattern

Operation Explanation

FX [1], [2] assign buttons

Turn on/o the eect that is specied in the eect section.

You can apply an eect to the pattern.

[BASS DRUM] fader Adjust the output level of the bass drum.

[SNARE DRUM] fader Adjust the output level of the snare drum.

[CLOSED HIHAT] fader Adjust the output level of the closed hi-hat.

[OPEN HIHAT] fader Adjust the output level of the open hi-hat.

Adjusting a pattern’s playback timing forward or backward

(NUDGE)

Here’s how to adjust the nudge setting.

This moves the pattern’s playback timing forward or backward, letting

you control the feel of the rhythm.

1. Hold down the [SHIFT] button and press the [SHUFFLE] button

to make it blink rapidly.

2. Use the [VALUE] knob to adjust the timing of the notes.

Display (Value) Explanation

n-24–n 24

Higher values make the note timing earlier; lower values make the note

timing later.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info