Bedienungsanleitung Roland DJ-808 (Seite 20 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

TR-REC (Step Recording)

In this method of recording, you create a pattern by specifying the steps

at which each instrument is sounded. You can also create a pattern while it

plays.

1. Press the [PATTERN] button to make it light.

2. Press a TR-S pad [1]–[16] to select the save-destination (pattern

number) of the pattern that you want to create.

3. Press the [TR-REC] button to make it light.

4. Press the [SCALE] button, and then use the [VALUE] knob to

specify the scale.

The display shows the current scale.

Select one of the following four to specify the length of a step.

Display Scale Explanation

8th note triplet (

)

Three steps will be one beat.

16t

16th note triplet (

)

Six steps will be one beat.

16th note (

)

Four steps will be one beat.

32nd note (

)

Eight steps will be one beat.

5. Press one of the [BD]–[OH] buttons to select the instrument

that you want to record.

Specifying a Serato DJ sample as an instrument

If samples are saved in the Serato DJ sample player, a sample selected

by the [1]–[8] buttons can be used as an instrument.

By holding down the [SHIFT] button and pressing a [1]–[4] button, you

can switch between banks A–D of the sample player.

6. Press the TR-S pads [1]–[16] to specify the steps at which you

want a note to be sounded.

Entering quiet beats

By holding down the button of the instrument you’re recording ([BD]–

[OH] buttons or [1]–[8] buttons) and pressing a TR-S pad, you can make

the instrument sound a quiet beat on the specied step. If a quiet beat

is specied, the TR-S pad illumination is dimmer.

7. Repeat steps 4–6.

Specifying the pattern length (last step)

You can specify the number of steps (last step) that the pattern uses.

1. Hold down the [SHIFT] button and press the [SCALE] button.

The display shows the current last step.

2. Turn the [VALUE] knob or press one of the TR-S pads [1]–[16] to

specify the last step.

Display (Value)

LS 1

–

Specifying an accent

You can add an accent to a step.

An accented step plays at a higher volume than usual.

1. Press the [ACC] button.

2. Press the TR-S pads [1]–[16] to specify the steps that you want

to accent.

Inputting velocity

For each step, you can specify the velocity with which each instrument

is sounded.

1. Press the button ([BD]–[OH] button or [1]–[8] button) of the

instrument whose velocity you want to specify, making the

button light.

2. Hold down the lit TR-S pad and turn the [VALUE] knob to

specify the velocity.

Display (Value)

–

127

Clearing a recorded instrument/accent from the pattern

Clearing only some of the steps

During TR-REC or playback, press the button to make the button light

of the instrument or accent that you want to clear ([BD]–[OH] buttons/

[1]–[8] buttons or [ACC] button), and then press the [CLEAR] button.

Instruments or accents at the steps during the time you press the

[CLEAR] button are cleared from the pattern.

Clearing all of the steps

During TR-REC or playback, hold down the [CLEAR] button and press the

button of the instrument or accent that you want to clear ([BD]–[OH]

buttons/[1]–[8] buttons or [ACC] buttons).

INST REC (Realtime Recording)

In this method of recording you create a pattern by recording your

performance on the performance pads in real time.

1. Press the [PATTERN] button to make it light.

2. Press a TR-S pad [1]–[16] to select the save-destination (pattern

number) of the pattern that you want to create.

3. Hold down the [SHIFT] button and press the [TR-REC] button to

make it blink.

The [TR-REC] button blinks.

4. Press the [START/STOP] button.

5. Strike the performance pads to record your performance.

To record BD–OH instruments

Press the [TR] button to make it light.

Instruments are assigned to the performance pads as follows.

BD SD CH OH

To record Serato DJ samples

Press the [SAMPLER] button to make it light.

Samples are assigned to the performance pads as follows.

* You can switch between banks A–D of the sample player by holding

down the [SHIFT] button and pressing a [1]–[4] button.

Sample 1 Sample 2 Sample 3 Sample 4

Sample 5 Sample 6 Sample

7 Sample 8

Step input

Press one of the [BD]–[OH] buttons/[1]–[8] buttons or [ACC] button to

enable step input. In this state, you can press a TR-S pad to step-input

instruments and accents even during INST REC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info