Bedienungsanleitung Roland DJ-808 (Seite 21 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating the DJ-808

Clearing a recorded instrument/accent from the pattern

Clearing only some of the steps

During INST REC or playback, press the button to make the button light

of the instrument or accent that you want to clear ([BD]–[OH] buttons/

[1]–[8] buttons or [ACC] button), and then press the [CLEAR] button.

Instruments or accents at the steps during the time you press the

[CLEAR] button are cleared from the pattern.

Clearing all of the steps

During INST REC or playback, hold down the [CLEAR] button and press

the button of the instrument or accent that you want to clear ([BD]–[OH]

buttons/[1]–[8] buttons or [ACC] buttons).

Synchronizing the TR-S Tempo with the Serato DJ Tempo

If you press the TR-S [SYNC] button, the tempo of the TR-S is synchronized

with the tempo of the song that’s loaded into the deck.

The tempo shown in Serato DJ’s virtual deck will be the same as the tempo

shown in the TR-S display.

Backing Up or Restoring TR-S Data

Backup

Here’s how to back up all patterns and instrument settings of the TR-S to

your computer.

1. While holding down the TR-S pad [1], turn on the power.

TR-S pads [1]–[16] and performance pads light green.

2. Use a USB cable to connect the DJ-808 to your computer.

TR-S pads [1]–[16] and performance pads illuminate in a colorful pattern.

3. On your computer, open the “DJ-808” drive.

4. Open the “BACKUP” folder, and copy the DJ808_PAT1.PRM le

and all of the DJ-808_PTN1.PRM–DJ-808_PTN16.PRM les to

your computer.

5. When copying is completed, operate your computer to eject

the “DJ-808” drive.

6. Disconnect the USB cable.

TR-S pads [1]–[16] and performance pads return to being lit green.

7. Turn o the power.

Restore

Here’s how to restore the backed-up TR-S data from your computer to the

DJ-808.

1. While holding down the TR-S pad [1], turn on the power.

TR-S pads [1]–[16] and performance pads light green.

2. Use a USB cable to connect the DJ-808 to your computer.

TR-S pads [1]–[16] and performance pads illuminate in a colorful pattern.

3. On your computer, open the “DJ-808” drive.

4. Copy the backup les into the “DJ-808” drive’s “RESTORE”

folder.

5. When copying is completed, operate your computer to eject

the “DJ-808” drive.

6. Disconnect the USB cable.

7. Wait until the TR-S pads [1]–[16] and performance pads are lit

green.

NOTE

Never turn o the power until the TR-S pads and performance pads are

lit green.

8. Turn o the power.

Using the DJ-808 in Stand-Alone Mode

You can use the DJ-808 when it is not connected to Serato DJ (when Serato

DJ is not running).

In stand-alone mode, you can use the following functions in each section

of the DJ-808.

Section Available functions

Mixer section

[TRIM] knobs

* Does not work if the [INPUT SELECT] switch is set to “PC.”

[HI], [MID], [LOW] knobs

[CHANNEL FX] buttons

[FX] knobs

Channel [CUE] buttons

Channel faders

[MASTER LEVEL] knob

TR/SAMPLER [CUE] button

[TR/SAMPLER] level fader

Cross fader

[BOOTH MONITOR] knob

Front panel

[CROSS FADER ASSIGN] switches

[INPUT SELECT] switches

[CROSS FADER] switch

[CH FADER] switch

TR-S section

Playing/copying/deleting

patterns

* If a sample from Serato Sampler

is assigned as an instrument,

a specied MIDI message is

transmitted when you play the

sample.

TR-REC

INST REC

VT section

Mic switch

[LEVEL] knob

[HI], [LOW] knobs

[PITCH] knob

[FORMANT] knob

[REVERB] knob

[AUTO PITCH] button

* Key information of the channel selected by the [SHIFT]+[CUE]

button is ignored.

Deck section

A MIDI message is transmitted when you operate a button/knob.

[SYNC] button

In standalone mode, the operation of the SYNC button changes.

When the [SYNC] button is lit:

Synchronization with an external device is possible.

If MIDI clock is input from a connected device, the DJ-808

synchronizes to that MIDI clock.

If multiple MIDI clocks are input, the DJ-808 synchronizes in the

following order of priority.

1. PC port

2. USB HOST port 3

3. USB HOST port 4

When the [SYNC] button is unlit:

The DJ-808 does not synchronize with an external device.

The DJ-808 is the MIDI clock master.

Performance pads

* With the default settings, the unit is in TR mode. You can switch

to another mode, but in modes other than TR mode, pressing a

button or pad only transmits MIDI messages.

Others

5 When you move (press) a top panel controller (except for

the controllers of the TR-S/VT section), MIDI messages are

transmitted.

5 MIDI messages are transmitted from the PC port. Only MIDI

messages for synchronization are transmitted from the MIDI OUT

connector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info