Bedienungsanleitung Roland DP90 (Seite 46 von 64) (Englisch)

528008

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Various Settings (Function Mode)

Indication Value Explanation

CPdl Fnc

Changing How the Pedals Work (Center Pedal)

When you turn on the power, the center pedal functions as the sostenuto pedal (p. 10).

You can change the function of the pedal to a variety of other operations.

SOST Sets function to sostenuto pedal.

PLAY

The pedal will have the same function as the [

] (Play/Stop) button.

LAYR

Pressing the pedal will layer on Tone 2, used for Dual play.

* The Layer function can be applied only when using Dual play.

OCT

Pressing the pedal will layer on a sound one octave higher.

* The Octave function cannot be applied while using Twin Piano, Dual play, or Split play.

LocalCtl

Preventing Doubled Notes When Connected to a Sequencer

(Local Control)

When you have a MIDI sequencer connected, set this parameter to Local O.

Since most sequencers have their Thru function turned on, notes you play on the

keyboard may be sounded in duplicate, or get dropped. To prevent this, you can

enable the “Local O” setting so that the keyboard and internal sound generator will be

disconnected.

OFF

Local Control is o.

The keyboard and composer are disconnected from the internal sound generator. Playing the keyboard will not produce sound.

Local Control is on.

The keyboard and composer are connected to the internal sound generator.

MIDI Ch (*1)

MIDI Transmit Channel Settings (MIDI Transmit Channel)

This setting speci es the MIDI channel on which the unit will transmit.

MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI

devices and specifying the appropriate MIDI channel for each device, you can play or select

sounds on those devices.

The unit will receive all sixteen channels (1–16).

OFF, 1–16

CD/A Typ

Setting the Type of CD To be Played Back (CD/Audio Type)

The unit may be unable to correctly recognize the type of CD being used. In such instances, you can specify the type of CD manually.

When the unit left the factory, this was set to “STRO” (Stereo). Normally, there is no need to make this setting.

MEMO

This setting is automatically saved in the unit.

AUTO, A, B, STRO

SaveSong

Renaming a Song (Save Song)

Here’s how to rename a song you’ve saved (p. 38).

CopySong

Copying a Saved Song (Copy Song)

A song you’ve saved to the internal memory can be copied to the USB ash drive. Alternatively, a song saved to the USB ash drive can be copied to

the internal memory. (p. 40)

Del Song

Deleting a Saved Song (Delete Song)

You can delete a saved song from the internal memory or the USB ash drive. (p. 41)

Format

Initializing the Memory (Format Media)

You can delete all songs from the internal memory or a separately sold USB ash drive. (p. 42)

MIDI

Sequencer

Local Control

Sound Generator

MIDI

Out

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DP90 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DP90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info