528008
49
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
Symptom Cause/Action Page
Even though you’re using head-
phones and the sound is muted,
a thumping sound is heard when
you play the keyboard
The unit uses a hammer action keyboard in order to simulate an acoustic piano’s playing touch as realistically as possible. For
this reason, you’ll hear the hammers thump when you play the keyboard, just as you would when playing an acoustic piano.
Since this unit allows you to adjust its volume, you might notice the sound of the hammers in certain situations, but this does
not indicate a malfunction. If vibration transmitted to the oor or walls is a concern, you may be able to minimize the vibration
by moving the piano away from the wall, or by laying down a commercially available anti-vibration mat designed for use with
pianos.
Power turns o on its own
When 30 minutes have elapsed since you last played or operated this unit, the power will turn o automatically. (This is the
factory setting).
If you don’t need the power to turn o automatically, turn the “Auto O setting “OFF.
p. 39
Power does not turn on
Is the AC adaptor connected correctly? p. 55
Could the power have been turned o by the auto-o function?
If you want to turn on the power after the auto-o function has turned it o, operate the [Power] switch to turn the power on
again.
p. 39
Nothing appears in the display
Since the unit uses a liquid-crystal display, you may nd that it is unable to display letters or other things in environments where
temperatures go below 0 degrees Celsius (32 degrees Fahrenheit).
Can’t perform operations Could Panel Lock be activated? Disengage the Panel Lock setting. p. 43
Pedal does not work, or is “stuck”
Is the pedal connected correctly?
Plug the cable rmly into the pedal connector.
p. 55
If you disconnect the pedal cord from the unit while the power is on, the pedal eect may remain “stuck” in the On condition.
You must power-o the unit before connecting or disconnecting the pedal cord.
p. 55
Could you have changed how the pedal eect is applied?
If the damper pedal part is set to “R, the pedal will apply only to the right tone; if it is set to “L, the pedal will apply only to the left
tone.
p. 45
Could Twin Piano be turned on?
If Twin Piano is on, the right pedal will aect only the right-hand keyboard zone and the left pedal will aect only the left-hand
keyboard zone.
p. 20
Could you have changed the function of the pedal?
If you’ve reassigned the function of the center pedal, this pedal will not operate as the sostenuto pedal.
p. 46
Unable to read from/write to USB
ash drive
Are you using (optional) Roland USB ash drive?
Reliable performance cannot be guaranteed if you use non-Roland USB ash drive products.
If you are unable to read or write USB ash drive successfully, change the USB memory mode. p. 47
“Buzz” is heard from external
devices
Are the external devices connected to more than one AC power outlet?
If you connect external devices, be sure to connect them to the same AC outlet.
The volume level of the instru-
ment connected to Input jacks is
too low.
Raise the volume of the connected device.
Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
Connected MIDI device does not
operate correctly
If turn o the unit, or the power is disrupted due to a power failure while you’re connected to a MIDI device, the settings of
that MIDI device may be altered. If this occurs, power-o the unit and your MIDI device. Then power-on the unit rst, and next
power-on your MIDI device.
No sound
No sound
Could the unit’s volume or the volume of the connected equipment be turned down? p. 6, p. 13
Could headphones be connected?
Could there be a plug inserted in a headphone jack?
The speakers will not produce sound if headphones or plug are connected to the headphone jacks.
p. 11
Has Local Control been set to “OFF”?
When Local Control is set to “OFF, no sound is produced by playing the keyboard. Set Local Control to “ON.
p. 46
No sound when you play back
a song
Has Local Control been set to “OFF”?
When Local Control is set to “OFF, no sound is produced by playing the song. Set Local Control to “ON.
p. 46
Could the Song Balance be set to “0”? p. 25
No sound from the left most
notes of the keyboard
Could the Visual Control mode be set to “MVC” or VLNK”?
If the Visual Control mode is set to “MVC or VLNK, the lowest 12 keys of the keyboard (A0–G#1) are used to control images; they
will not produce sound.
p. 47
No sound (when a MIDI device is
connected)
Are all devices powered on?
Are the MIDI cables connected correctly? p. 11
Do the MIDI channels of the unit and the connected device match? p. 46
Notes don’t sound right
Pitch of the keyboard or song is
incorrect
Could you have made Transpose settings?
p. 21
p. 35
Is the Master Tune setting appropriate? p. 44
Is the setting for the Temperament correct? p. 44
If stretch tuning is “ON, the piano will be tuned in a unique way; notes in the pianos upper range will be tuned slightly sharper,
while notes in the lower range will be tuned slightly lower. For this reason, certain pitches may seem to be o, but this is actually
the way that an acoustic piano should sound.
p. 44
Not all the notes you play are
sounded
The maximum simultaneous polyphony is 128 voices. If you’re using Dual Play, or playing along with a song, or making heavy
use of the damper pedal, the number of notes being requested by the performance data may exceed the maximum available
polyphony, causing notes to drop out.
Sounds are heard twice (doubled)
when the keyboard is played
Is the unit in Dual play? p. 15
When the unit is connected to an external sequencer, set the Local Control to o. Alternatively, the sequencer could be set so its
Soft Thru feature is O.
p. 46
Troubleshooting
49
Operation Guide Panel Descriptions Before You Play Performing Practicing
Convenient Functions
Appendix
Function Mode
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland DP90 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland DP90

Roland DP90 Bedienungsanleitung - Deutsch - 64 seiten

Roland DP90 Bedienungsanleitung - Holländisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info