Bedienungsanleitung Roland DP90 (Seite 50 von 64) (Englisch)

528008

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Troubleshooting

Symptom Cause/Action Page

The wrong instrument is selected

when you press the [E. Piano],

[Strings], or [Other] button

Tone buttons [E. Piano] [Strings] [Other] also operate as buttons that select “Recommended Tones.”

Connecting a commercially-available CD-ROM drive to the USB memory port and selecting a song from a CD-ROM produced for

the VIMA (VIMA TUNES) will automatically cause sounds appropriate for that song to be assigned to the [E. Piano], [Strings], and

[Other] Tone buttons, so that you can select “recommended” sounds by pressing one of these buttons.

p. 14

Eect does not apply

When you are using Dual play or Split play, and dierent eects are speci ed for the two selected tones, the eect will not be

applied to Tone 2 (when using Dual play) or the left-hand tone (when using Split play).

–

Reverberation remains even if You

defeat the Ambience eect

The unit’s piano sound faithfully simulates the depth and resonance of an acoustic piano, and this may give the impression of

reverberation even if you’ve defeated the Ambience eect.

Also, you may be able to eliminate some reverberation by reducing the value set for “Cabinet Resonance.”

p. 45

The sound of the higher notes

suddenly changes from a certain

key

On an acoustic piano, the approximately one and a half octaves of notes at the top of the keyboard will continue sounding

regardless of the damper pedal. These notes also have a somewhat dierent tonal character. The unit faithfully simulate this

characteristic of acoustic pianos. On the unit, the range that is unaected by the damper pedal will change according to the key

transpose setting.

–

High-pitched ringing is heard

If you hear this in headphones:

Piano sounds that have a brilliant and crisp character contain substantial high-frequency components that may sound as though

a metallic ringing has been added. This is because the character of an actual piano is being faithfully reproduced, and is not a

malfunction.

This sound can be adjusted by modifying the following settings.

• String Resonance (p. 45)

• Ambience (p. 18)

If you don’t hear this in headphones:

It is likely that there is some other reason (such as resonances within the unit). Please contact your dealer or a nearby Roland

service center.

–

Low notes sound wrong, or are

buzzy

If you set the volume to the maximum setting, the sound may be distorted depending on how you perform.

If this occurs, turn down the volume.

–

If you don’t hear this in headphones:

Performing at high volumes may cause the speakers or objects near the unit to resonate. Fluorescent lights or glass doors may

also resonate sympathetically. In particular, this is more likely to occur for lower notes and higher volumes. You can take the

following measures to minimize resonances.

• Locate the speakers 10–15 cm (4–6 inch) away from walls or other surfaces.

• Keep the volume down.

• Move away from the objects that are resonating.

If you hear this in headphones:

It is likely that there is some other reason. Please contact your dealer or a nearby Roland service center.

–

Song does not play correctly

Only the sound of a particular

instrument in a song does not

play

Could a part be muted?

If the button indicator is out, the music on that part is not heard. Press the part button so the indicator is illuminated.

p. 26

Sound is heard from a muted part

Could the part mute volume be set to other than “0”?

If you set this to “0,” the sound of a muted part will be completely inaudible.

p. 27

Song volume is low /

Volume diers between recording

and playback

Could the Song Balance volume be lowered? p. 25

Can’t play back a song saved in

USB ash drive

Could the Audio les of the format be played?

Audio les of the following format can be played back.

• File extension “.WAV”

• 16-bit linear

• “44.1 kHz” sampling rate

p. 25

Is the lename extension “MID”?

Files with other lename extensions cannot be handled as song data.

–

Song tempo becomes unstable When playing a song from USB ash drive, the tempo may become unstable if there is an excessive amount of performance data. –

Song name in USB ash drive is

not shown

The song name will not be shown if the song information in the le is empty or consists only of spaces. –

Is the lename extension “MID”?

Files with other lename extensions cannot be handled as song data.

–

Song names can consist only of English letters, numerals, certain symbols, and single-byte characters from the Japanese

syllabary; the unit is unable to correctly display the name if other characters are used.

–

Can’t record / play back

Can’t record SMF Has one of the part buttons for recording been selected? p. 29

Can’t record audio Is a USB ash drive connected to the USB memory port? –

The recorded performance

disappeared

Your recorded performance will disappear if you switch o the unit’s power or select a song.

There is no way to recover the lost performance. Before you turn o the power, save your recorded performance in the internal

memory or the USB ash drive.

–

Limitations regarding audio les

• Ambience will not be applied to audio les (p. 18).

• The Part Mute function cannot be used when playing audio les (p. 26).

• Audio data cannot be saved in the unit’s internal memory. In order to record audio, you must connect a USB ash drive (separately sold) (p. 29, p. 33, p. 34).

• You can’t rename an audio le (p. 38).

• Audio les cannot be copied (p. 40).

Roland DP90 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DP90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info