Bedienungsanleitung Roland GP-9 (Seite 10 von 38) (Englisch)

805072

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Performing

Operation

Changing the right-hand

tone

(Split–Right Tone)

1. Press the [ ] button so that “-” “+” is

shown in the top line of the screen.

2. Press a tone button.

The tone group is selected.

3. Press the [–] [+] buttons to select a tone.

Changing the point at

which tones are separated

(Split–Point)

1. Press the [ ] button.

This switches to Keyboard mode.

2. Press the [ ] button twice.

The Split mode settings screen appears.

3. Press the [–] [+] buttons to access the

screen of the item you want to set.

4. Press the [ ] button so that “-” “+” is

shown in the bottom line of the screen.

5. Press the [–] [+] buttons to select the value

that you want to change.

Changing the volume

balance of the left-hand

tone and right-hand

tone

(Split–Balance)

Changing the octave of the

left-hand tone and right-

hand tone

(Split–Left Shift / Split–Right

Shift)

MEMO

With the split screen shown, hold down the [ ] button and press a

key to set the split point from the keyboard.

Layering Two Tones

You can play two tones simultaneously from a single key. This function is

called “Dual Play”.

1. Press the [ ] button.

2. Press the [–] [+] buttons to select “Keyboard Mode” and press

the [ ] button.

3. Press the [–] [+] buttons to select “Dual”.

4. Press the [ ] button to exit Keyboard mode.

The split screen appears.

Tone 1

Tone 2

Item

When you turn on the power, “Concert Piano” is selected as the tone

1 and “SymphonicStr1” is selected as the tone 2.

5. To exit Dual Play, press the [ ] button to enter Keyboard

Mode, and set “Keyboard Mode” to “Whole”.

Changing the settings for Dual Play

To edit the following settings, access the Dual screen.

Operation

Changing Tone 2

(Dual–Tone 2)

1. Press the [ ] button so that “-” “+” is

shown in the lowest line of the screen.

2. Press a tone button.

The tone group is selected.

3. Press the [–] [+] buttons to select a tone.

Changing Tone 1

(Dual–Tone 1)

1. Press the [ ] button so that “-” “+” is

shown in the top line of the screen.

2. Press a tone button.

The tone group is selected.

3. Press the [–] [+] buttons to select a tone.

Operation

Changing the volume

balance of the two tones

(Dual–Balance)

1. Press the [ ] button.

This switches to Keyboard mode.

2. Press the [ ] button twice.

The Dual mode settings screen appears.

3. Press the [–] [+] buttons to access the

screen of the item you want to set.

4. Press the [ ] button so that “-” “+” is

shown in the bottom line of the screen.

5. Press the [–] [+] buttons to select the value

that you want to change.

Changing the octave of the

two tones

(Dual–Tone1 Shift / Dual–

Tone2 Shift)

Instantly recalling the Grand Piano tone

Long-press the [ ] button to cancel Split Play or Dual Play and recall the

Grand Piano (Concert Piano) tone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland GP-9 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland GP-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info