Bedienungsanleitung Roland GP-9 (Seite 11 von 38) (Englisch)

805072

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Performing

Playing in a Dierent Key (Transpose)

You can transpose the keyboard in semitone steps.

For instance, if you wanted to play a song in the key of C that was written in

the key of E, set the keyboard transpose value to “4”.

When you play “C-E-G”, you hear “E G B”

1. Press the [ ] button.

2. Press the [–] [+] buttons to select “Kbd Transpose”.

3. Press the [ ] button.

4. Press the [–] [+] buttons to select a value.

Value -6–0–5 (default value: 0)

5. Press the [ ] button to exit Keyboard mode.

Reading the note name (e.g., C4)

The alphabetical indication for settings such as “split point” shows the

name of the note. The solfege equivalents are as follows: A is “la”, B is

“ti”, C is “do”, D is “re”, E is “mi”, F is “fa” and G is “so”.

For example, the indication “C4” means “the fourth ’C’ from the left

edge of the keyboard”.

Change the Key Touch (Key Touch)

You can change the playing feel (touch) of the keyboard.

1. Press the [ ] button.

2. Press the [–] [+] buttons to select “Key Touch”.

3. Press the [ ] button.

4. Press the [–] [+] buttons to select a value.

Value Explanation

Fix, 1–100

(default value: 50)

The default value of 50 provides a key touch that is closest

to that of an acoustic piano. Higher settings make the

keyboard feel heavier. With the “Fix”, notes sound at a xed

volume regardless of how strongly you play the keyboard.

5. Press the [ ] button to exit Keyboard mode.

Adjusting the Time from When You Play the Key Until

the Piano Is Heard (Hammer Response)

You can adjust the time from when you play the key until the piano sound

is heard.

1. Press the [ ] button.

2. Press the [–] [+] buttons to select “Hammer Response”.

3. Press the [ ] button.

4. Press the [–] [+] buttons to select a value.

Value Explanation

O, 1–10

(default value: 1) Higher values produce a greater delay.

5. Press the [ ] button to exit Keyboard mode.

Registering Your Favorite Settings

You can register the settings you’ve adjusted to the way you like, and then

switch between settings for each song or for dierent players.

Registering the current performance settings

1. Long-press the [ ] button.

The “Store Registration” screen appears.

2. Use the [1] [2] [3] [4] buttons and the [–] [+] buttons to select

the registration number where you want to store the current

settings, and press the [ ] button to execute.

3. Edit the name.

a. Press the [–] [+] buttons to select the character to edit, and

press the [ ] button to execute.

b. Press the [–] [+] buttons to edit the character, and press

the [ ] button to execute.

¹To insert a character, press the [ò] button.

¹To delete a character, press the [ó] button.

3. Using the steps for editing a character, press the [–] [+] buttons

to select µ on the right side of the screen, and press the [ ]

button to execute.

The Registration screen appears, and the settings you registered are

shown.

MEMO

When you select “Start-up”, you can register these settings as the

settings used right when the instrument is turned on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland GP-9 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland GP-9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info