Bedienungsanleitung Roland Juno Di (Seite 58 von 136) (Englisch)

499471

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Overview

On the JUNO-Di, you can assign names to each tone, rhythm set,

performance. The procedure is the same for any type of data.

fig.disp-Name.eps_70

Use the [

] [ ] buttons to move the cursor to the

location where you wish to input a character.

Turn the dial to specify the character.

Available Characters/Symbols

space, A–Z, a–z, 0–9, ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | }

The tempo setting is common to the entire JUNO-Di.

The following functions use this setting as their tempo.

• Rhythm patterns

• Arpeggio

• Song (SMF) playback

Press the [TAP TEMPO] button.

The tempo setting is shown in the top line of the screen.

fig.disp-tempo.eps_70

Press the [TAP TEMPO] button three or more times at the

desired tempo.

The tempo will be set to the interval at which you pressed the

button.

When you have made the setting, press the [EXIT]

button.

When the tempo setting is displayed, you can use the dial to

directly change the tempo setting.

The tempo setting you’ve changed as described above will be

discarded when you turn off the power. If you want the tempo

setting to be retained even while the power is turned off, use

the System setting “System Tempo” (p. 75) to specify it.

If you set the system setting “Sync Mode” (p. 76) to “SLAVE,”

the tempo value will be shown as “MIDI”; the tempo will be

determined by MIDI clock messages from an external MIDI

device.

The screen in which the upper line indicates the name of the tone or

setting (performance name) is called the “main screen.”

Normally, pressing the [EXIT] button a number of times will take you to

the main screen.

The main screen for settings that play a single sound

• The top line shows the name of the sound.

• This screen will be shown immediately after you turn on the power.

The main screen for settings that play multiple sounds

• The top line shows the name of the setting (performance name).

Assigning a Name

Changing the Tempo

Main Screen

The “*” indication in the main screen

When you edit the sound or performance settings (e.g., when you

change the lower sound of a split), an “*” will appear in the main

screen.

• For settings that play a single sound, an “*” will be added to the

sound name in the main screen when you edit the sound’s

settings (Patch Edit; p. 59 or Rhythm Edit; p. 60).

• For settings that play multiple sounds, an “*” will be added to the

performance name in the main screen when you switch the sounds

you’re playing or when you edit the settings (Part Edit; p. 60).

• For settings that play multiple sounds, an “*” will be added to the

sound name in the main screen when you edit the sound settings

(Patch Edit; p. 59, Rhythm Edit; p. 60).

When you save the sound or settings (performance) indicated by

the “*” to user memory, the “*” will disappear from the main screen.

Settings you’ve edited will be lost when you turn off the

power or select another sound. If you want to keep the

changes you made, save them to user memory.

For more information about saving, see “Saving Your

Settings” (p. 62).

JUNO-Di_e.book 58 ページ２００９年６月２２日　月曜日　午前９時２３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland Juno Di Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info