Bedienungsanleitung Roland Juno Di (Seite 59 von 136) (Englisch)

499471

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Detailed Tone Settings

The process of modifying a tone’s settings is called “patch editing (PATCH

EDIT).”

To edit the currently selected tone, proceed as follows.

Press the [MENU] button.

The “MENU” screen will appear.

Use the [

] [ ] buttons to select “EDIT,” and press

the [ENTER] button.

Using the [ ] [ ] buttons, get “PATCH EDIT” to be

indicated in the upper line of the screen.

fig.disp-ptachedit.eps

_70

You can access the edit screen of step 3 by holding down the

[SHIFT] button and pressing the [RHYTHM] button.

If you’re using split or dual, the part name is shown in the upper line

of the screen.

For split

: Upper (UPPER) part

: Lower (LOWER) part

For dual

: Part 1

: Part 2

Use the [

] [ ] buttons to move the cursor to the

item that you want to edit.

Use the dial to set the desired value.

Press the [EXIT] button to leave the edit screen.

The changes you make are temporary; they will be discarded

when you turn off the power or select a different tone. If you

want to keep the changes you make, you must write them into

memory (p. 62).

When you use Patch Edit to modify the settings, an “*” will

appear next to the tone name in the main screen. The “*” will

disappear when you save that tone (p. 62).

Tone Settings

Editing a Tone’s Volume, Portamento,

Mono/Poly, or Bend Range (Patch Edit)

Item

Value Description

Patch Level

0–127

Specifies the volume of the tone.

Portamento

OFF, ON

Specifies whether the portamento effect

will be applied (ON) or not (OFF).

* Portamento is an effect which smoothly

changes the pitch from the first-played

key to the next-played key. By applying

portamento when the Mono/Poly is

“MONO,” you can simulate slide

performance techniques on a violin or

similar instrument.

Portamento

Time

0–127

When portamento is used, this specifies

the time over which the pitch will change.

Higher settings will cause the pitch

change to the next note to take more

time.

Mono/Poly

MONO,

POLY

Specifies whether the patch will play

polyphonically (POLY) or monophonically

(MONO).

The “MONO” setting is effective when

playing a solo instrument patch such as

sax or flute.

MONO

: Only the last-played note will

sound.

POLY

: Two or more notes can be played

simultaneously.

Bend Range

0–+48

Specifies the degree of pitch change in

semitones when the pitch bend lever is all

the way right.

For example, if this parameter is set to

“+12,” the pitch will rise one octave when

the pitch bend lever is moved to the right-

most position.

Bend Range

Down

0–-48

Specifies the degree of pitch change in

semitones when the pitch bend lever is all

the way left.

For example if this is set to “-48” and you

move the pitch bend lever all the way to

the left, the pitch will fall 4 octaves.

JUNO-Di_e.book 59 ページ２００９年６月２２日　月曜日　午前９時２３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland Juno Di Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info