Bedienungsanleitung Roland TR-8S - RHYTHM PERFORMER (Seite 19 von 24) (Englisch)

674604

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Various Operations

Copying a Pattern or Kit (COPY)

Here’s how to copy a pattern or kit.

1. Press the [COPY] button.

The COPY screen appears.

2. Use the [VALUE] knob to select what you want to

copy, and press the [ENTER] button.

The COPY screens appear in the order of “Pattern”

“Variation”

“Track”

“Kit”

“Inst.”

3. Use the [VALUE] knob to select the copy-source,

and press the [ENTER] button.

4. Use the [VALUE] knob to select the copy-

destination, and press the [ENTER] button.

A confirmation message appears.

5. To execute the copy, use the [VALUE] knob to select

“O K ,” and press the [ENTER] button.

If you decide to cancel, use the [VALUE] knob to select “Cancel,”

and then press the [ENTER] button.

Shortcuts for copy operations

Function Operating the Unit

Copy a pattern

(PATTERN COPY screen)

Hold down the [COPY] button

and press the [PTN SELECT]

button.

Copy a kit

(KIT COPY screen)

Hold down the [COPY] button

and press the [KIT] button.

Copy an instrument

(INST COPY screen)

Hold down the [COPY] button

and press the [INST] button.

Copy a pattern

(selected track)

(track copy-destination select screen)

Hold down the [COPY] button

and press a [BD]–[RC] button.

Copy a variation

(selected

variation)

(variation copy-destination select screen)

While holding down the [COPY]

button, press a variation [A]–[H]

button.

Erasing a Pattern (CLEAR)

Here’s how to erase a pattern.

1. While holding down an instrument select button,

press the [CLEAR] button.

This lets you erase the pattern of the selected instrument.

Only the selected variation is affected.

If playing back in TR-REC or INST REC

1. During playback, press the [CLEAR] button.

The pattern of the instrument that you select by pressing its

instrument select button is erased only while you hold down the

button.

Erasing Motion

Erasing all MOTION

Here’s how to erase all MOTION recorded in the variation that is

selected for playback.

1. Hold down the MOTION [ON] button and press the

[CLEAR] button.

Erasing MOTION for a specific track

Here’s how to erase all MOTION recorded for a specified track in the

variation that is selected for playback.

1. Hold down the MOTION [ON] button and press an

instrument select button.

Erasing MOTION for only a specific knob

Here’s how to erase all MOTION for a specific knob recorded in the

variation that is selected for playback.

1. Hold down the MOTION [ON] button and operate

the knob.

MEMO

MOTION is also erased when you perform the operation of

holding down the [CLEAR] button to erase steps.

Playing Weak Beats

You can change the way in which weak beats (WEAK BEATS) are

entered during TR-REC.

Use “UTILITY”

“GENERAL”

“WeakBeat” to specify this.

Parameter Explanation

wSHIFT

While holding down the [SHIFT] button,

press a pad [1]–[16].

PAD

Each time you press a pad [1]–[16], you

alternate between normal sound

weak

beat

off.

Specifying the Flam Spacing

You can use the LCD screen to specify the flam spacing.

“Editing the Pattern Settings (Pattern Setting)” (p. 13)

* If you specify “0,” there will be no flam effect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland TR-8S - RHYTHM PERFORMER Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info