Bedienungsanleitung Roland XP-30 (Seite 44 von 216) (Englisch)

647744

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

Chapter 1. Overview of the XP-30

In Patch Mode ([EDIT] Indicator is Dark)

fig.1-09

The function buttons will act as Tone Switch buttons ([TONE

SWITCH]) and Tone Select buttons ([TONE SELECT]).

[TONE SWITCH] allow you to turn each Tone in the Patch

on (lit) or off (dark). When a Tone is turned on, it can be

heard.

Use [TONE SELECT] to select the Tone you wish to modify.

To select a Tone to modify, turn off [EDIT] indicator in the

Tone setting display. To select two or more Tones

simultaneously, hold down one of [TONE SELECT] and

press the other [TONE SELECT]. In this case, the numbers of

Tones other than the first-selected Tone will be displayed as *

symbols.

In Rhythm Set Mode

([EDIT] Indicator is Dark)

fig.1-10

The function buttons (TONE SELECT section) will select the

key shown in the display.

If the [EDIT] indicator is turned off in the Rhythm Set setting

display (the setting display for individual keys), the function

buttons will select the key to be edited.

[TONE SELECT 1]: move to an octave lower key

[TONE SELECT 2]: move to the semitone below

[TONE SELECT 3]: move to the semitone above

[TONE SELECT 4]: move to an octave higher key

When [EDIT] Indicator is Lit

Each mode contains a large number of settable items, and

these items are organized into groups. When [EDIT]

indicator is lit, the function buttons are used to select display

groups. The displays that appear will depend on the current

mode. The groups that can be selected in each mode are

printed on the front panel above the buttons.

fig.1-11

* For information on what the function buttons do in GM mode,

please see “Chapter 5. Using the XP-30 as the GM Sound

Module” (p. 124).

■ About the Cursor Buttons

The cursor buttons are used to move between display pages

or to move the cursor.

fig.1-12

Moving Between Display Pages

The various displays are grouped by function button, and

each group contains several display pages. Use the cursor

buttons to move between these display pages and groups.

Moving Between Pages

An upward-pointing arrow ( ) shown in the display

indicates that one or more pages exist before this page. A

downward-pointing arrow ( ) shown in the display

indicates that one or more pages exist after this page. Press

[ ] to move to the previous page, or [ ] to move to the next

page. Pressing [ ] while holding [SHIFT] will jump to the

first page. Pressing [ ] while holding [SHIFT] will jump to

the last page.

fig.1-13

Moving Between Groups

From one of the Play displays, hold down [SHIFT] and press

[ ] to access the left-most function button group display.

In group displays that you select using the function buttons,

you can hold down [SHIFT] and press [ ] to move to the

group of the function button to the left, or hold down

[SHIFT] and press [ ] to move to the group of the function

button to the right.

Whenever you are in any group display, you can move to

another group even if [EDIT] indicator is dark. In other

words, this procedure allows you to move to a different

group without having to turn on [EDIT] indicator, and is a

faster and more efficient way to get around.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XP-30 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info