Bedienungsanleitung Roland XP-30 (Seite 45 von 216) (Englisch)

647744

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

Chapter 1. Overview of the XP-30

Chapter 1

Moving the Cursor (underline)

When two or more items are shown in a single display page,

move the cursor (underline) to the item whose value you

wish to set. Press [ ] to move the cursor to the left, or [ ]

to move it to the right.

fig.1-14

A symbol appearing in the upper right of the display

indicates that there are other items in this page that the

screen has no room to show. Press [ ] to see these items,

and press [ ] to return to the previous display.

fig.1-15

■ Modifying a Value

To modify a value, use the VALUE dial, [INC]/[DEC] or [0]–

[9] (numeric keys).

fig.1-16

* Each parameter has a specific range, so you cannot set any value

smaller than the minimum value or greater than the maximum

value.

VALUE Dial

Rotating the VALUE dial clockwise increases the value,

counterclockwise decreases the value. Holding down

[SHIFT] as you move the VALUE dial increases value

increments so you can make large value changes faster.

[INC] and [DEC]

Pressing [INC] increases the value, and [DEC] decreases it.

Keep [INC] or [DEC] pressed for continuous adjustment. For

faster value increases, keep [INC] pressed down and press

[DEC]. For decreasing value faster, keep [DEC] pressed

down and press [INC].

If you press [INC] or [DEC] while holding down [SHIFT], the

value increments will get bigger.

[0]–[9] (Numeric Keys)

[0]–[9] (Numeric Keys) lets you directly specify a numerical

value. When you enter the number, the value will blink. This

indicates that the value has not yet been finalized. To finalize

the value press the ENTER button. To reverse the sign of the

number (+/-), hold down [SHIFT] and press [0].

* Some parameters do not require you to press [ENTER] to

finalize the value.

< Example 1: To enter a value of 38 >

Press [3] → press [8] → press [ENTER]

< Example 2: To enter a value of -60 >

While holding down [SHIFT] press [0] → press [6] → press

[0] → press [ENTER]

* You can switch from a positive to negative numerical value

anytime before you press [ENTER].

Special Functions of the Numeric Keys

You can use the numeric keys to specify non-numerical

settings for some parameters.

* For the procedure of using the Numeric Keys to enter the

characters or symbols in a name, refer to “Assigning a

Name” (p. 46).

Performance/Patch/Rhythm Set Group

In the PLAY displays of Performance mode/Patch mode/

Rhythm Set mode, you can use the numeric keys to specify

groups. To specify the group, hold down [SHIFT] and press

numeric keys to specify groups.

Buttons

Group

[SHIFT]+[1] PR-A (preset A)

[SHIFT]+[2] PR-B (preset B)

[SHIFT]+[3] PR-C (preset C)

[SHIFT]+[4] PR-D (GM (General MIDI))

[SHIFT]+[5] PR-E (preset E)

[SHIFT]+[6] USER (user)

Restoring a Previous Value (Undo)

If you wish to restore a value to its immediate previous

value, press [UNDO/COMPARE] to return the value to its

pre-modified state.

The Undo function can be used when modifying sound

source settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XP-30 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info