Bedienungsanleitung Roland XP-30 (Seite 53 von 216) (Englisch)

647744

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

Chapter 2. Playing

Chapter 2

6. Make sure that the Key Range parameter is ON. If it is

OFF, use the cursor buttons to move the cursor to the

Key Range parameter, and rotate the VALUE dial or

press [INC]/[DEC] to turn it ON.

* If the Key Range parameter is OFF, the keyboard cannot be split

even when you set the key range.

7. Press [ ] to access the KEY RANG display.

fig.2-10

8. Press [EDIT] to make the indicator go dark.

9. Press a function button to select the part whose Local

parameter you wish to turn ON. When the [1-8/9-16]

indicator is dark, you can select parts 1–8. When the [1-

8/9-16] indicator is lit, you can select parts 9–16.

10. Specify the range of notes for which the part will sound.

Use the cursor buttons to move the cursor to the Lower

parameter and set the lowest note of the range. Move the

cursor to the Upper parameter and set the highest note of

the range.

11. Rotate the VALUE dial or press [INC]/[DEC] to specify

the range of notes.

* By specifying sections for different Parts so that they overlap

each other, you can combine two or more Patches only in a

specific section.

12. When you are finished making settings, press [EXIT] to

return to the PERFORM PLAY display, and begin

playing.

■ Playing Along with a Song

Playback (XP-30 Used as a

Multitimbral Sound Source)

When a Single Performance is selected, the XP-30’s keyboard

will play only the Part you selected from the keyboard,

convenient when you play the keyboard along with a song

playback.

fig.2-11.e

Selecting a Part You Want to Play on

the Keyboard

If a Single Performance is selected, press [ ] or [ ] to

select the Part you want to play. The selected Part is called

the Current Part.

1. Make sure that the PERFORM PLAY display is showing.

2. Press [ ] or [ ] to choose the Part to be played.

The part number shown in the upper right of the display will

change.

fig.2-12

* You can also press a function button to select the part that you

wish to play. At this time, the function button indicator of the

selected part will light.

Muting a Specific Part

(Turning Receive Channel On/Off)

While you play along with the playback of a song, you can

turn on/off any specific Part. This allows you to turn off the

melody Part for karaoke applications or for practicing the

muted Part.

1. Make sure that [EDIT] indicator is dark. If it is lit, press

[EDIT] to turn it off.

At this time, the function button indicators will indicate the on/

off status of each Part. When [1-8/9-16] indicator is dark, the

function button indicators will indicate the status of Parts 1-8.

When [1-8/9-16] indicator is lit, the function button indicators

will indicate the status of Parts 9-16. Lit is on, and dark is off.

2. Hold down [SHIFT] and press the function button to

switch Parts on/off.

* This setting is linked with the Rx parameter (PERFORM/

MIDI/MIDI).

Part 1 Part 2 Part 15 Part 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XP-30 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info