Bedienungsanleitung Roland XP-30 (Seite 59 von 216) (Englisch)

647744

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

Chapter 2. Playing

Chapter 2

1. Press [SYSTEM] to make the indicator lit, and then press

the [ARPEGGIO] function button to access the

ARPEGGIO display.

fig.2-20

* For details regarding each parameter, refer to “Arpeggio

Settings (ARPEGGIO)” (p. 108)

2. Move the cursor to “Style” and specify the style you

want.

3. Move the cursor to “Octave Range” and specify the key

range over which you want arpeggio.

4. Press [ ], move the cursor to “Motif,” and specify the

order in which the notes of the chord will be sounded.

* The available choices depend on the Style parameter setting. For

details, refer to “Arpeggio Style List” (p. 182).

5. Move the cursor to “Beat Pattern” to change the beat

(rhythm).

* The available choices depend on the Style parameter setting. For

details, refer to “Arpeggio Style List” (p. 182).

6. Press [ ], move the cursor to “Accent Rate,” and specify

the groove ratio.

A 100% setting will result in the most pronounced “groove”

feel.

7. Move the cursor to “Shuffle Rate” and specify the swing

rate.

With a setting of 50%, the notes will be spaced evenly. As the

value increases, the note timing will have more of a “swing”

feel.

8. Press [ ], move the cursor to “Key Velocity,” and specify

the strength with which the notes of the chord will be

sounded.

Move the cursor to “Key Velocity” and specify the force of

the chord.

When REAL is selected, the velocity at which the notes are

actually played will be used. With a setting of 1–127, the

specified velocity value will be used regardless of the force

with which you play the chord.

9. If you want to play an arpeggio using Layer

Performance, move the cursor to “Part” and specify the

Part for which you want arpeggio.

* Parts other than that specified here will not sound as arpeggios,

and the notes of the chord will sound as you play.

10. Move the cursor to “Tempo” and specify the speed of an

arpeggio.

11. After you finish settings, press [EXIT].

Convenient Functions for

Performance

■ Transposing the Keyboard in

Octave Units (Octave Shift)

The Octave Shift function transposes the pitch of the

keyboard in 1 octave units (-3– +3 octaves).

For playing a bass part more easily using your right hand,

transpose the keyboard down by 1 or 2 octaves.

1. Press [+OCT] or [-OCT] and its indicator will light.

Pressing [+OCT] once will raise the keyboard 1 octave and

pressing [-OCT] once will lower it 1 octave.

The specified Octave Shift setting will be shown in the

“center=C4” indication of each Play screen. For example if

you press [+OCT] once to raise the keyboard one octave, the

display will indicate “center=C5.” This means that when you

press the C4 key, the C5 note will sound.

fig.2-21

* There is only one Octave Shift setting in the XP-30 so it remain

valid even if you select a different Patch, Performance or

Rhythm Set or turn power off.

2. To turn off the Octave Shift function, press the other

button [+OCT] or [-OCT] of that pressed in step 1 the

same number of times. The indicator will go off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XP-30 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info