647744
76
Zoom out
Zoom in
Vorherige Seite
1/216
Nächste Seite
76
Chapter 3. Creating Your Own Sounds
Modifying Waveform (WAVE)
This group contains parameters related to the basic
waveform (Wave) of the Tone.
WAVE
Group (Wave Group)
Select the Group of the Wave.
INT-A, B: Internal A, B
EXP-AE: Wave Expansion Boards AE
* It is not possible to select a Group of a Wave Expansion Board
that is not installed.
Number (Wave Number)
Select the Wave number. The name of the Wave will be
displayed in parentheses ( ).
Gain (Wave Gain)
Adjust the gain (volume boost) of the Wave. The setting
range is -6+12 dB, in steps of 6 dB. An increase of 6 dB
doubles the gain. When using the Booster to distort the
sound, it is effective to use the maximum Gain setting.
Switch (Tone Switch)
When you wish to use the Tone, set this ON. When not using
the Tone, set this OFF. In order to make best use of the
available number of simultaneous voices, unused Tones
should be turned off.
* When you use TONE SWITCH [1]–[4] to turn Tones on/off,
this is the parameter that is being set.
FXM (Frequency cross modulation)
FXM is a function that uses frequency modulation to add
new harmonic components to the sound. It can be used as a
simple ring modulator in order to add a metallic flavor.
Switch (FXM Switch)
When you wish to use FXM turn this ON. If not, turn it OFF.
Color (FXM Color)
Select one of four ways in which FXM will use frequency
modulation.
Depth (FXM Depth)
Adjust the depth of the frequency modulation created by
FXM.
TONE DELAY
This parameter produces a time delay from the moment the
key is pressed (or released) until when the Tone begins to
sound. Since you can adjust the timing of each Tone, you can
create effects in which pressing a single key produces two or
more sounds at different times.
* If you do not wish to use Tone Delay, set Mode to NORMAL
and Delay Time to 0.
Mode (Tone Delay Mode)
Select the way in which the Tone will sound.
NORMAL: The Tone will sound after the specified
Delay Time.
fig.3-32.e
HOLD:
If the key is pressed for longer than the
specified Delay Time, the Tone will sound after
the Delay Time. If the key is released earlier
than the Delay Time, the Tone will not sound.
fig.3-33.e
PLAYMATE:
If 2 seconds or more pass before the next key is
pressed, the Tone will sound after the Delay
Time. If less than 2 seconds pass before the next
key is pressed, that interval will become the
Delay Time after which the Tone will sound.
CLOCK-SYNC:
Synchronize the Delay Time to either the Patch
Tempo (PATCH/COMMON/PATCH
CLOCK), the Performance Tempo
(PERFORM/COMMON/PERFORM CLOCK),
or the tempo clock of the XP-30s system.
If you want to use a fixed tempo in Patch
mode (Tempo parameter setting), set the
Source parameter (PATCH/COMMON/
PATCH CLOCK) to PATCH and set the
desired tempo.
If you want to use the systems tempo clock
in Patch mode, set the Source parameter
(PATCH/COMMON/PATCH CLOCK) to
SYSTEM.
If you want to use a fixed tempo in
Performance mode (Tempo parameter
setting), set the Source parameter
(PERFORM/COMMON/PERFORM
CLOCK) to PERFORM and set the desired
tempo.
If you want to use the systems tempo clock
in Performance mode, set the Source
parameter (PERFORM/COMMON/
PERFORM CLOCK) to SYSTEM.
release key
Delay Time
press key
release key
Delay Time
Tone does
not sound
press key
release key press key
Delay
Time
76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland XP-30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info