Bedienungsanleitung Roland XV-2020 (Seite 103 von 169) (Englisch)

647722

103

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

103

Examples of Applications Using the XV-2020

Examples of Applications

Using the XV-2020

6. Click [DETAIL] for SYSTEM COMMON, then set [CLOCK

SOURCE] to [INT].

fig.08-08a.eps_50

fig.08-08b

* When the System Clock Source parameter is set to MIDI or USB, you

can synchronize the LFO cycle to an external device.

7. When [TEMPO] (System Tempo) changes, the speed of the

phrase loop changes along with it.

* The phrase loop sounds at the system’s tempo regardless of which key

you press. The settings for pitch and FXM are ignored.

Using a Pedal Switch to Change the

Rotary Speed of the Rotary Effect

1. Connect a pedal switch (DP-2, DP-6, etc.) to your external

MIDI controller (MIDI keyboard, etc.).

2. Set the pedal switch of the external MIDI controller to

generate FOOT TYPE (CC04) control-change messages.

* To learn how to set up the pedal switch, refer to the external MIDI

controller’s owner’s manual.

3. Click the for [PATCH NAME] and select a Patch that

uses ROTARY as the Multi-Effect.

4. Click [PARAM] for [MFX].

fig.08-03.eps_50

5. Set CONTROL SOURCE 1 to CC04.

6. Set DESTINATION 1 to SPEED, and SENS 1 to +63.

fig.08-19.eps_44

7. When you wish to speed up the rotary effect, press the

pedal switch. Release the pedal switch to slow down the

rotary effect.

Changing Part Settings from

an External MIDI Device

By sending Control Change messages for different Part settings,

including volume, panning, and pitch, you can change these settings

remotely from an external MIDI device connected to the XV-2020.

This lets you control fade-ins and fade-outs, open and close filters,

and exercise other controls in real time from the external MIDI

device.

The parameters that can be used for changing the settings, and the

Control Change messages that can be used to change the values, are

shown below.

* For more detailed information about Control Change messages, please

refer to “MIDI Implementation” p. 136).

* To change multi-effects, reverb, or chorus effects from an external

MIDI device, send a “System Exclusive message” (p. 140).

Remotely Controlling Volume (p. 136)

• Volume: Controller number 7

Remotely Controlling Stereo Positioning (p. 136)

• Panpot: Controller number 10

Remotely Applying Portamento (p. 136, p. 137)

• Portamento: Controller number 65 (Portamento switch),

Controller number 5 (Portamento time)

Remotely Changing Sounds’ Attack and Release

Time (p. 137)

• Release Time: Controller number 72

• Attack Time: Controller number 73

Remotely Changing the Cutoff Frequency (p. 137)

• Cutoff: Controller number 74

Remotely Changing Resonance (p. 137)

• Resonance: Controller number 71

Remotely Changing the Amount of Internal Chorus/

Reverb (p. 145)

• Effect 3 (Chorus Send Level): Controller number 93

• Effect 1 (Reverb Send Level): Controller number 91

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XV-2020 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info