Bedienungsanleitung Roland XV-2020 (Seite 104 von 169) (Englisch)

647722

104

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

104

Examples of Applications Using the XV-2020

Remotely Changing Pitch (p. 141)

• Coarse: Controller number 100 (value is 0), Controller number

101 (value is 2), Controller number 6 (value is 16–112)

• Fine: Controller number 100 (value is 0), Controller number 101

(value is 1), Controller number 6 (value is 32–96), Controller

number 38 (value is 0–127)

* When changing the Coarse parameter, set the amount of change in

pitch using Control Number 6 (Data Entry MSB) value. There is no

change in pitch when the value is set to “64.” The pitch is raised as the

value increases from 64, and is lowered as the value decreases below

64.

* When changing the Fine parameter, set the amount of change in pitch

using Control Number 6 (Data Entry MSB) and Control Number 38

(Data Entry LSB) settings. There is no change in pitch when Data

Entry MSB is set to “64” and Data Entry LSB to “0.” The pitch is

raised as the respective values increase, and lowered as the respective

values decrease.

Remotely Specifying the Range of Pitch Bend (p. 138)

• Bend Range: Controller number 100 (value is 0), Controller

number 101 (value is 0), Controller number 6 (value is 0–12)

Procedure

1. Enable the external MIDI device to send a Control Change

message.

For example, if you want to change the volume level, set the external

MIDI device to send Control Number 7 (Volume message). In this

case, the MIDI channel is matched to the MIDI channel of the Part

whose volume you want to change.

* For information on how to set up your external MIDI controller, refer

to its owner’s manual.

2. Operate the external MIDI device - adjust its controls, play

its sequencer, etc. - to send the desired MIDI messages.

* As sound changes occur, displayed parameter values reflect the

changes you make.

About RPN

“RPN” (Registered Parameter Number) is an extended MIDI

message activated by a previous Control Change message.

Use an RPN when you want to remotely change the XV-2020’s

Pitch or Pitch Bend range settings. An RPN has an superior part

(RPN MSB) and a subordinate part (RPN LSB). The RPN MSB

(Control Number 101) informs the XV-2020 that an RPN setting

is to follow, and the RPN LSB (Control Number 100) value tells

the XV-2020 which parameter is to be set. Finally, a Data Entry

(Control Change 6) message sets the desired value.

Once the XV-2020 has received an RPN parameter, all further

Data Entry messages on that MIDI channel are applied to that

parameter. In order to prevent accidental changes, once the

desired setting has been made for the parameter, we

recommend that RPN be set to “Null.”

For example, to raise the pitch of a certain Part by one half-step

(semitone) send the following Control Change message from

the external MIDI device.

• Controller number 100: value “0”

• Controller number 101: value “2”

• Controller number 6: value “65”

• Controller number 100: value “127” <- RPN null

• Controller number 101: value “127” <- RPN null

* For more detailed information about RPN messages, please refer

to “MIDI Implementation” (p. 136).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XV-2020 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info