Bedienungsanleitung Rommelsbacher BGO1600 (Seite 10 von 20) (Deutsch, Englisch)

490003

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

7.3 Setting temperature/time values with programmes P1 – P12

After selecting a programme, you may set the belonging temperature and time values by pressing

the Setting Button [°C]. The values on the display may be varied via Plus [+] or Minus [-].

Depending on the type of menu (type of programme), you may choose between different

temperature and time values. During the setting procedure the automatic symbol “A” in the upper

left-hand corner will not glow. The symbol on the 4

digit is a static one (difference to Manual

Operation: 4

digit is blinking during the setting process).

General notes

- Temperatures can basically be set within a range from 50-300°C.

Setting the temperature to 0°C will skip the relevant programme step.

- The switch-off temperature for the meat probe can be adjusted within a range from 10°C -

99°C. If the switch-off temperature is set to 0°C, this programme section will be skipped.

- The duration of a programme step can be defined within a range from 1-99 min.

If the duration is fixed as 0 min., the relevant programme section will be skipped.

- The start time can be set within the range from “current time” to “current time + 23:59h”

- If no button is pressed for more than 12 seconds, the menu will be quit automatically.

Thereafter, the current time will be indicated again. The values set until then will be quit.

- You may start the programmes during any setting step, subject to the parameters currently

set, by pressing the Start/Stop Button [►■].

7.3.1 Settings for programmes P1-P8 (Gentle Cooking/Low Temperature Cooking)

Function Readout Description

Selected

programme: P4

Selected programme P4 appears on the display

Press Setting Button [°C] for changing to the options for altering the parameters

Display of type

of programme

Programme type information: Gentle/Low Temperature

Cooking. This cannot be changed with programmes P1-P12

Press Setting Button [°C] for changing to set the start time

Setting the

start time

Now you can set the start time (time at which programme

starts running). Current time is suggested (immediate

start)

Adjust via [ + ] / [ - ] buttons

Press Setting Button [°C] for changing to set the core temperature

Setting the core

temperature

Now you can set the core temperature.

The value stored in the respective programme is suggested

(example: value for P4 = 80°C)

Adjust via [ + ] / [ - ] buttons

Press Setting Button [°C] for changing to set the requested temperature

Setting the

requested

temperature

Now you can set the requested temperature for top and

bottom heat. The value stored in the respective

programme is suggested (example: value for P4 = 145°C)

Adjust via [ + ] / [ - ] buttons

Press Start/Stop Button [►■] to start a programme, or press Setting Button [°C] to reset or

recheck the parameters (start time menu will appear)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher BGO1600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info