21
Details on the temperature levels:
The values indicated are reference values and apply to standard steel pots with 20 cm Ø.
CT 2010/IN and CT 3410/IN
level 01 60 °C
level 02 80 °C
level 03 100 °C
level 04 120 °C
level 05 140 °C
level 06 160 °C
level 07 180 °C
level 08 200 °C
level 09 220 °C
level 10 240 °C
NOTE: The temperature at the bottom of the cookware is checked by a sensor in the centre of
the cooking zone. The regulation will only function properly if the cookware covers this area.
The cookware should have a flat and not too thick bottom to ensure a good heat transfer. The
maximum tolerable temperature for the “temperature level” mode is 240 °C.
Changeover between “power level” and “temperature level” mode
You may change at any time from the “power level” mode to the “temperature level” mode and
vice versa. The last selected setting of the respective function is saved.
• During operation in the “power level”
mode touch the sensor “temp“ (6) for
changing to the “temperature level”
mode.
• During operation in the “temperature
level” mode touch the sensor “power“
(7) for changing to the “power level”
mode.
Setting the operating time (timer) – from 1 up to 180 minutes
The timer can be activated in the “power level” mode as well as in the “temperature level”
mode.
• For activating the timer touch the “timer“
sensor (2).
The appliance automatically switches
into the “operating time” mode.
The display (4) shows “0:00“, the LED
“timer“(8d) is lit continuously.
NOTE: If there is no further activation within 5 seconds after activating the operating time, the
control will switch back to the normal cooking mode without timer.
