714226
10
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
display „POWER“ sensor
(power levels)
„TEMP“ sensor
(temperature levels)
main switch sensor
ON / STANDBY
LED displays for
operating mode indication
„-“ and „+“ sensors
(to change parameters)
„TIMER“ sensor
(operating time)
LED display for
operating mode
10
Induction cooking provides for extra safety: Even when the cooking utensils are removed
f
rom the cooktop without having turned it off, the heating process is interrupted automatically.
In case a cloth or another combustible material should be placed on the cooktop by accident,
it cannot burn even if the cooktop has been activated. After the cooking process, nothing but
the residual heat emitted by the pot is noticeable on the glass ceramic plate.
The cooking surface is very easy to clean. As it is not heated directly, leftovers cannot scorch.
Neither do you have to wait for it to cool before cleaning.
Selecting pots and pans
Suitable: any fl at-bottomed (8 - 24 cm in diameter) cooking utensils made of iron,
such as enamelled pots, pots made of cast iron or of magnetic stainless steel.
Unsuitable: any cooking utensils consisting of aluminium, copper, glass or ceramic, pots
made of unmagnetic stainless steel, as well as any pots having a pot diameter of less than 8 cm.
Tip: Check by means of a magnet whether the pot bottom is suitable. If the magnet clings to
the outside of the pot bottom, the vessel is qualifi ed for induction cooking.
Your new appliance at a glance
a) The control panel
Every actuation of a button is verifi ed by an audible acknowledgement signal. Please activate
the buttons with your fi ngertips only for damages to be avoided.
b) Initial use
Place the appliance on a heat-resistant, stable and fl at working surface (non-metallic!) and do
not operate it in the proximity of other appliances (electric stove, gas fl ame etc.). The space
above the appliance must be free. The distance to any wall must be at least 10 cm. Unhindered
air circulation has to be ensured.
Connect the appliance to the power supply. There will be a short audible signal and the red LED
displays above the main switch sensors of the two cooktops will glow. The fan initiates a short
function test and then the appliance is in the stand-by mode.
ON/STANDBY
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rommelsbacher CT3408IN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info