Bedienungsanleitung Rommelsbacher EBC3477TC (Seite 20 von 28) (Deutsch, Englisch)

713982

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Cooking with your built-in hob

ON/OFF sensor [1] (main switch)

Use the ON/OFF sensor to activate as well as to deactivate the control of the cooktop.

Activating the control

The Touch Control electronics of the built-in hob is activated by touching the ON/OFF switch [1] and

changes from OFF mode into wait mode. To this end, the ON/OFF sensor must be activated for 1 second.

There will be a short buzzer signal in acknowledgement.

In wait mode both power level setting indicators will permanently show “0.”. This indication might

possibly shift into the background, depending on the cooktop’s status in terms of residual heat and

possible errors.

In addition to the ﬁgure, the decimal point in the bottom right-hand corner next to the respective right-

hand cooking zone indicators will be glowing permanently during both wait and active mode.

When a cooking zone is activated within the 10-second wait mode period, the control switches over to

active mode. Provided there is no further input within a period of 10 seconds after switch-on, the control

will automatically switch back to OFF mode, accompanied by an audible signal.

Deactivating the control

Both wait and active mode allow for the control to be deactivated at any time using the ON/OFF sensor.

This deactivation mode always takes priority during operation, regardless of other sensors being activated

simultaneously or the key lock having been activated.

PLUS/MINUS sensors [3]/[4] and [6]/[7]

Use the PLUS/MINUS sensors to switch the cooking zones on and off as

well as to adjust the requested power level setting or running period of

the timer.

Activating a cooking zone (cooking)

In either wait or active mode a cooking zone can be directly activated via the belonging PLUS/MINUS

sensors ([3]/[4] for the large cooking zone, or [6]/[7] for the small cooking zone) unless the cooking zone is

in timekeeping mode (refer to „timer“ section for more details).

Setting the power level

When starting with a PLUS sensor, the power level setting is skipped from “0.” to “4.”. When starting with

a MINUS sensor, the power level setting is skipped from “0.” to “9.”. Further activation of a PLUS sensor

raises the power level setting for the pertaining cooking zone. Analogously, further activation of a MINUS

sensor reduces the power level setting.

Continuous activation of a sensor automatically raises or reduces the power level setting at 0.5-second

intervals. Having reached the maximum power level setting, the power level setting is maintained (ﬁnal

power level setting) regardless of any continuous activation. This ﬁnal power level setting is not cancelled

until the respective sensor is brieﬂy released and then re-activated. Such is required for selecting the

automatic cooking function.

Automatic temperature system

Your cooktop comes equipped with an automatic temperature system, i. e., the respective temperature is

kept constant by energy being supplied in cycles. That cycling can be observed by watching the heating

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher EBC3477TC Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info