Bedienungsanleitung Rommelsbacher EBC3477TC (Seite 23 von 28) (Deutsch, Englisch)

713982

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

current running period of the timer is shown.

• While the timekeeper continues counting in OFF mode, the respective timer LED is glowing permanent-

ly. This shows that the value on the 7-segment display relates to the timer, whereas it cannot be directly

altered at that stage. To this end, the control must ﬁrst be reactivated using the ON/OFF sensor.

• A timer LED permanently glowing during active mode shows that the timer of the respective cooking

zone has been programmed and is counting down, whereas the time is not being indicated on the

7-segment display.

• Provided there is no further adjustment made within 10 seconds after activation of the timer (the

display keeps indicating “00”), the display as well as the allocation of the PLUS/MINUS sensors change

back automatically into the power level setting mode. If no cooking zone is activated, the control chan-

ges immediately into the OFF mode after the 10-second period.

Setting the timer value (running period)

• Having activated a timer, the belonging LED is blinking as described. The requested countdown period

of the timer (running period) can then be set using the PLUS/MINUS sensors.

• Starting with the PLUS sensor, the ﬁrst value indicated is skipped to “01” and is increasing by single

steps to a maximum of “99” (= ﬁnal maximum power level setting) with every further activation.

• Starting with the MINUS sensor, the indicated value is skipped to “30” and is decreasing by single

steps down to “01” (initial minimum power level setting; when reached, a signal tone is heard) with

every further touch of the sensor. In order to attain the value “00”, the MINUS sensor must be released

and activated anew. Further activation of the MINUS sensor will not alter the “00” indication (= ﬁnal

minimum power level setting).

• When activating the sensors permanently, the setting speed is automatically accelerated, i. e., the time

required from one step to another is reducing as long as the sensor is being activated.

• When the PLUS or MINUS sensors are not activated within 10 seconds subject to cooking zone related

programming, the indicator and the allocation of the PLUS/MINUS sensors automatically change back

to the power level setting. When using a timer as a timekeeper, the indicator and the sensor allocation

do not change back to the power level setting, as it must not be activated for the duration of that

period.

• Timer settings take priority over the operating time limitation subject to high power level settings (refer

to table on “operating time limitation”).

• When nothing but a timekeeper has been programmed, the control maintains the wait mode ﬁrst (with

no other cooking zones being activated). Provided there is no input of new values, the control proceeds

as described and changes into OFF mode.

Timer countdown

• For the last 10 seconds of the timer countdown the indicator always adapts itself to the timer and

counts down the seconds.

• When the countdown of the time is completed, there is an audible signal and the respective cooking

zone is deactivated. Thereafter, the indications “00” and “H” (if residual heat is prevailing) appear

alternately, while the belonging timer LED is blinking in addition.

• After a maximum of 2 minutes or by activating any sensor, the signalling is stopped.

Interrupting the timer / Altering the timer value (running period)

• The setting value of a timer can be altered at any time after its activation or in timekeeping mode using

the PLUS or MINUS sensor.

• A timer can be deactivated by adjusting the setting to “00” using the MINUS sensor. Also, it can be

immediately reset to “00” by activating both the PLUS and the MINUS sensor simultaneously.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher EBC3477TC Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info