35
Step 16:
If the appliance is not needed any
more, switch it off and pull the
mains plug.
Step 17:
Clean the appliance and the
accessories.
Making hot water
Ě :LWKWKLVDSSOLDQFHKRWZDWHUIRUWHDHWFFDQEHPDGH
Ě :DWHURXWRIWKHKRWZDWHUVWHDPQR]]OHKDVDWHPSHUDWXUHRIFDŃ&
Ě Attention: Make sure that the holes in the nozzle are always clean and not clogged.
Ě Attention: For moving the nozzle, only touch it at the upper plastic part.
Step 2:
Position the portafi lter without fi lter
insert at the marking of the brew
head and lock it by turning it to the
right as far as it will go.
Step 3:
Place a vessel below the outlet of
hot water/steam nozzle.
Warning: Casing, brew head,
portafi lter, fi lter inserts and hot
water/steam nozzle are getting hot
GXULQJXVH
Step 1:
Prepare the appliance.
Please refer to
“Cleaning and maintenance”
for further information.
Ě &KHFNWKHZDWHUWDQN
regularly, refi ll water if
necessary.
Ě &KHFNWKHGULSSDQ
regularly, empty it if
necessary.
Step 4:
Choose the function
“espresso/hot water”.
Step 5:
Switch the appliance on.
The operation pilot lamp glows
permanently.
The appliance heats up and the
red temperature pilot lamp glows
permanently.
When the lamp extinguishes, the
appliance is ready for use.
Step 6:
Start hot water supply.
Turn the rotary knob to the right.
Dispense the desired quantity of
hot water.
Step 7:
Stop hot water supply.
Turn the rotary knob to the top. The
appliance is ready for use.
NOTE: The appliance carries excess
water back into the water tank via a
UHFLUFXODWLRQV\VWHP
