36
Step 8:
Remove the vessel.
Step 10:
Clean the appliance and the
accessories.
Step 9:
If the appliance is not needed any
more, switch it off and pull the
mains plug.
Cleaning and maintenance
Switch the appliance off before cleaning and always pull the mains plug!
Do not immerse appliance, power cord and plug in water nor clean it under running water!
Attention – hazard of injury and burns! Prior to cleaning casing and accessories, let the
complete appliance cool down!
Ě &OHDQWKHDSSOLDQFHLPPHGLDWHO\DIWHUXVHVRWKDWUHVLGXHVZLOOQRWGU\
Ě 5HPRYHWKHDFFHVVRULHV
Ě :LSHWKHFDVLQJZLWKDGDPSFORWKDQGGU\LWDIWHUZDUGV
Ě &OHDQWKHEUHZKHDGďVLQWHULRUZLWKDGDPSFORWKWRUHPRYHUHVLGXHVRIWKHFRIIHHSRZGHU0DNHVXUHWKHLQWHUQDO
gasket is always clean and without residues.
Ě &OHDQZDWHUWDQNZLWKRXWúOWHUFDUWULGJHGULSSDQZLWKFXSWUD\SRUWDúOWHUDQGúOWHULQVHUWVLQKRWZDWHUZLWKVRPH
dishwashing detergent and wipe dry afterwards.
Ě &OHDQWKHúOWHULQVHUWVLQWHQVHO\IURPERWKVLGHVZLWKDFOHDQLQJEUXVKRFFDVLRQDOO\'HPRXQWWKHVLHYHE\ORRVHQLQJ
the screw on the inside and remove the small sieve insert. Pierce sieve and holes carefully with the attached cleaning
pin so that they remain free. Afterwards, assemble the sieve and tighten the screw.
Ě &OHDQWKHKRWZDWHUVWHDPQR]]OH
¶Remove the stainless steel bush of the hot water/steam nozzle and clean it thoroughly. Make sure that the outlet
holes at the underside as well as the small openings in the upper area of the bush are always free.
¶Clean the hot water/steam nozzle with a damp cloth. Make sure the outlet hole at the underside is always free.
8VHWKHHQFORVHGFOHDQLQJSLQRUDSRLQWHGREMHFW
c Touch the stainless steel nozzle at
its shaft for removing, turn it to the
right and unlock it.
d Then, pull the stainless steel nozzle
down.
Clean the outlet hole of the hot
ZDWHUVWHDPQR]]OHWKRURXJKO\
c Touch the stainless steel nozzle at
the shaft for attaching it and push the
nozzle on.
d Then, turn it to the left and lock it.
Please refer to
“Cleaning and maintenance”
for further information.
