714264
27
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
27
Stopping the appliance
Pay attention during operation that both collection containers and the strainer do not
overflow.
Press the START/PAUSE button to stop the appliance.
The pilot lamp flashes slowly in red.
The appliance can be restarted by pressing the START/PAUSE button again.
NOTE: If the appliance is not restarted within 5 minutes after switching
off, it is switched off automatically.
Switching the appliance off
If the material has been processed and hopper and screw conveyor are
empty, the appliance switches of automatically.
The pilot lamp flashes slowly in red.
Press the ON/OFF button to switch off the appliance.
NOTE: If you do not switch off the appliance within 5 minutes by pressing
the ON/OFF button, it switches off automatically, as soon as there is not
enough material in the screw conveyor.
Unplug the appliance after each use to switch it off permanently!
C.) Clearing a screw conveyor blockage
It is possible that material which is too large, too hard or too moist blocks, jams or gets stuck in the
screw conveyor during processing. If there is a blockage in the screw conveyor, it stops automatically.
If the outlet of the seed container is blocked due to material which is too large, the screw conveyor is
still running. However, no oil or oil press cake is produced.
To clear a blockage in the outlet of the seed container, unplug the appliance and tilt it. Fill the material
to be pressed in a suitable container. Crush the pieces which are too large before you press them again.
In case of a blockage in the screw conveyor, press the Reverse function
button for at least 5 seconds. The appliance starts and the screw conveyor
turns now anticlockwise. The blockage is possibly cleared. Keep the button
pressed during operation. Do not worry if the appliance causes loud
creaking noises. This is harmless.
The pilot lamp flashes quickly in green.
If you release the ON/OFF button, the appliance stops again.
Then, you can start the appliance by pressing START/PAUSE to check
whether the blockage is cleared.
If the blockage cannot be cleared this way, unplug the appliance and
remove the material to be pressed as described above. Open then the
screw conveyor casing, disassemble the screw conveyor and clean it.
Examine the material for foreign matters (see section on “Disassembling
and assembling the appliance”).
If the blockage is cleared, you can continue processing.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rommelsbacher OP700 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info