Bedienungsanleitung Rommelsbacher OP700 (Seite 28 von 32) (Deutsch, Englisch)

714264

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

NOTE: If the appliance stops due to a stuck screw conveyor, the material to be processed is too moist. We

recommend in this case to dry the material at approx. 60 °C (circulating air) to 80 °C (upper and lower

heat) for 2 to 3 hours in the oven. To do so, spread the material with a thin layer on a baking tray and put

it at middle level in the oven.

Cleaning and maintenance

CAUTION: Hazard of injury!

• Always unplug the appliance before cleaning!

• Never immerse the base unit and the plug in water nor clean

them under running water!

CAUTION: Hazard of injury and burns!

• Screw conveyor, screw conveyor casing and the bottom side

of the foldable arm become hot during operation!

• Hot surfaces ﬁrstly stay hot after switch-off!

NOTE: Improper and/or irregular cleaning can result in mould formation!

• Allow the appliance including accessory parts to cool down after use and clean it thoroughly so that

residues will not dry up.

• If it happened that residues dried up though, so that you are not able to loosen the screw conveyor, you

can try to use a hair-blower to heat it up carefully. The heat may cause the residues emitting some oil,

which will make the disassembly easier. You can also put the screw conveyor together with the screw

conveyor casing into some hot dishwater and let soak for a while.

• All accessory parts are not suitable for cleaning in the dishwasher.

• Remove all detachable parts from the base unit.

• Clean the base unit with a moist cloth and wipe it dry.

• Clean all accessory parts thoroughly in warm water and dishwashing detergent. Use the supplied

cleaning brush so that you can clean all corners, edges and tight spaces.

• Assemble the appliance only after all parts have dried.

• CAUTION: Do not use abrasives or a dissolvent or sharp objects!

• CAUTION: Never use a steam jet appliance for cleaning!

NOTE: If the seal of the screw conveyor is worn or damaged, it must be replaced to ensure proper operation

of the appliances. You can buy the replacement seal at your dealer or in spacialist shops.

Seals are wearing parts and are therefore not covered by the warranty!

Interesting facts about working with your oil press

• This electrical oil press is perfectly suited to provide yourself with home-made, individual oils of high

quality. Healthy, home-made oils from seeds and nuts are ideally suited for a balanced diet which

refrains from artiﬁcial additives. Fresh, self-made oils are also a high-quality basis for natural cosmetics

products.

• The press uses the gentle cold press procedure which ensures that ﬂavour, vitamins and nutrients are

preserved in your oil. All who attach great importance to the pure ﬂavour of high-quality, individual oils

will ﬁnd the perfect expert in this electrical press.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher OP700 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info