Bedienungsanleitung Rotel rdv 1080 (Seite 14 von 28) (Englisch)

139017

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

English

AC Power Input

It is best to plug the RDV-1080 directly into a

2-pin polarized wall outlet. Avoid the use of

extension cords.

Your RDV-1080 will automatically configure

itself for the proper AC line voltage ranging

from 110 volts to 240 volts at 50/60Hz. No

setting is required to match the unit to your

local voltage.

Plug the supplied cord into the AC INPUT re-

ceptacle on the back of the unit. After all con-

nections have been made, plug the cord into

an appropriate AC wall outlet.

NOTE

: If you are away from home for an ex-

tended period of time, it is a sensible precau-

tion to unplug your audio/video components.

Basic Operation

The RDV-1080 can be operated using its front-

panel buttons or from corresponding buttons

on the supplied infrared remote control. Spe-

cific instructions for each of the basic operat-

ing controls are detailed here. Additional fea-

tures, as well as settings available from the

On-Screen Displays are described in later

sections of the manual.

STANDBY Switch

DVD POWER Switch

Standby LED

The LED above the front-panel STANDBY but-

ton illuminates when the RDV-1080 is connected

to a live AC outlet, but is in standby mode.

Press the STANDBY button or remote control

DVD POWER button to fully activate the

RDV-1080, indicated by the front-panel dis-

play being illuminated. Press either button again

to put the RDV-1080 in standby mode; the dis-

play turns off and the LED illuminates.

Pressing the OPN/CLOSE button or PLAY

will also activate the unit from standby mode.

NOTE

: You can choose to use an Auto Standby

function that puts the unit in standby mode

after 30 or 60 minutes of inactivity. See the

Setting Preferences section of this manual.

Front-Panel Display

DISPLAY OFF Button

A lighted display on the front-panel of the

RDV-1080 provides information about the status

of the unit, activation of special features, and

track/time information.

The display can be turned off by pressing the

DISPLAY OFF button which will light the LED

above the button. Press the button again to

turn the display back on.

See the illustration at the front of this manual

for the location of each section of the display:

Title/Group

displays the number of the

current

Title

Group

Chapter/Track

displays the number of

the current

Chapter

Track

Step

displays the current step number of

the program.

Audio Format

displays the digital au-

dio format of the inserted disc.

B.S.P./Bonus

indicates when a DVD

Audio disc contains B.S.P. (Browsable Still Pic-

tures) or a Bonus Group.

Disc Type

displays the type of disc in-

serted in the unit.

Function

indicates which special features

are activated.

Time Mode

indicates which time mode

is shown in the Multi-Information Window of

the Display.

Audio Channel

shows which of the six

possible audio channels are in use.

Multi-Information

shows time and status

information in an alphanumeric display.

Audio LED Indicators

Five front-panel LEDs provide information about

the format of the disc being played.

DVD Audio

lights when the disc contains

DVD Audio programming.

Sampling Rate

indicates the sampling

frequency of the digital bitstream

Disc Drawer

OPN/CLOSE Button

A motor-driven disc drawer, located in the center

of the RDV-1080, slides out to accept a disc

and retracts for playback. Place the disc in

the drawer label-side up. Make sure the disc

is properly centered in the tray. Do not use

accessory stabilizer devices.

When the disc drawer is closed, pressing the

OPN/CLOSE button opens the drawer. Press

the button again to close the drawer. The drawer

also closes when the PLAY

button is pressed.

In addition, the drawer can also be closed from

the opening On-Screen Display by moving the

cursor over the CLOSE icon and pressing the

ENTER button on the remote.

Playing a Disc

PLAY/SELECT Buttons

Press the PLAY button to start playing the

disc from the beginning. If the disc drawer is

open, it will close automatically.

The PLAY

button always starts play from the

beginning of the disc, except when it is after

the PAUSE

button has been pressed. In this

case, the disc will resume playing from the

current location.

Playback can also be started from the Open-

ing Screen Display by moving the cursor over

the PLAY icon and pressing the ENTER button

on the remote.

Stopping a Disc

STOP/CLEAR Buttons

Press the STOP button to stop a disc that is

playing. Playback will also stop when the DVD

POWER button on the remote is pressed.

The RDV-1080 memorizes the point at which

the disc stopped playing, with an option of

resuming play at that point (see RESUME but-

ton, following). This stored position remains

in memory even if the unit is put in standby

mode; however, it is erased from memory when

the disc drawer is opened.

Resuming Play

RESUME Button

The RESUME button restarts playback after it

has been stopped. Instead of playing from the

start of the disc, the RESUME button restarts

play at the last location on the disc when play

was stopped.

RDV-1080 DVD Audio/Video Player

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1080 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info