Bedienungsanleitung Rotel rdv 1080 (Seite 24 von 28) (Englisch)

139017

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

DOWN MIX Mode

The RDV-1080 can provide fully decoded 5.1

channel surround signals at the analog audio

outputs. To take full advantage of this decoded

signal, the preamp or amplifier receiving it

should be equipped with 5.1 channel analog

audio inputs. If not, the RDV-1080 can

“downmix” the full surround sound signal to

a signal the preamp or surround processor can

handle. This setting only affects the analog

output signal when playing a DVD Video disc

with multichannel surround audio. Choose the

setting that best matches your system.

To change DOWN MIX MODE setting:

• On the PREFERENCE 2 screen, use the

CURSOR

buttons to move the over

the DOWN MIX MODE item.

• Press the CURSOR

buttons to choose

the desired setting.

Lt/Rt: Downmixes the full 5.1 channel sig-

nal into an encoded 2-channel surround

signal. Use this setting to send the analog

audio signal to a surround sound decoder

that has analog surround processing (such

as Dolby

Pro Logic

), but does not have

5.1 channel analog inputs.

Lo/Ro: Downmixes the 5.1 channel sig-

nal to a conventional 2-channel stereo sig-

nal. Use this setting to send the analog audio

signal to a preamp, TV, or recorder with

conventional two-channel stereo input and

no surround sound decoding capability.

OFF: Supplies the full 5.1 channel signal

to the analog audio outputs. Use this set-

ting for surround processors that have 5.1

channel audio inputs. This setting must be

used when you select the 5.1 CHANNEL

or EXPERT setting in the SPEAKER SETTING

preferences.

NOTE

: The DOWN MIX feature does not work

when the VSS function is activated.

COMPRESSION Setting

When playing a Dolby Digital DVD Video Disc,

the RDV-1080 can compress the dynamic range

of the audio signal. This reduces the difference

between quiet sounds and loud sounds. It may

be desirable if your system is routinely taxed

by loud passages or for listening at low vol-

ume settings. Choose the setting that best

matches your system.

To change the COMPRESSION setting:

• On the PREFERENCE 2 screen, use the

CURSOR

buttons to move the over

the COMPRESSION item.

• Press the CURSOR

buttons to choose

the desired setting.

ON: Activates the Compression feature

(only for DVD Video Discs with Dolby Digital

recordings).

OFF: No compression. Full dynamic range.

DTS BASS MANAGEMENT Setting

Settings described later in this section enable

you to match the RDV-1080’s 5.1 channel audio

output to the specific capabilities of your speak-

ers (i.e. for large or small speakers.) This set-

ting gives you the option to override these

settings and treat all speakers as “large” when

playing DTS-encoded disc. This setting only

functions when playing a DTS disc; the default

speaker settings are in effect for all other discs.

To change the setting:

• On the PREFERENCE 2 screen, use the

CURSOR

buttons to move the over

the DTS BASS MANAGEMENT item.

• Press the CURSOR

buttons to choose

the desired setting.

OFF: This is the default setting for DTS re-

cordings. Overrides the speaker settings

and treats all speakers as “large”.

ON: All speaker settings are effective, even

when playing a DTS recording. Although

this setting will not match the full DTS speci-

fication, it may be preferred if you have

small speakers that cannot handle signifi-

cant bass information.

AUTO STANDBY Setting

The RDV-1080 has an Auto Standby feature

that will put the unit in standby mode follow-

ing either 30 or 60 minutes of inactivity.

To change the setting:

• On the PREFERENCE 2 screen, use the

CURSOR

buttons to select the AUTO

STANDBY item.

• Press the CURSOR

buttons to choose

the desired setting.

60: Puts the unit in standby mode after 60

minutes of inactivity.

30: Puts the unit in standby mode after 30

minutes of inactivity.

OFF: The Auto Standby function is disabled.

The unit will stay on until it is manually put

in standby mode.

SCREEN SAVER Setting

TV Monitors can be easily damaged if a static

image is displayed for a long time. The Screen

Saver feature automatically replaces a steady

image with a safer image following several

minutes of inactivity. There are four optional

settings.

To change the setting:

• On the PREFERENCE 2 screen, use the

CURSOR

buttons to select the SCREEN

SAVER field.

• Press the CURSOR

buttons to choose

the desired setting.

MODE 1: The Screen Saver image ap-

pears and “scrolls”.

MODE 2: The Screen Saver image ap-

pears and does not scroll.

DIMMER: The existing image is darkened

to protect the screen.

OFF: The Screen Saver function is disabled.

NOTE

: If Mode 1 causes picture instability with

your TV, select a different mode.

SPEAKER Settings

The SPK. SETTING page of the PREFERENCES

DISPLAY provides a simple “5.1 CHANNEL”

or “2 CHANNEL” selection that is adequate

for most users to configure the output of the

RDV-1080 for their loudspeakers. Alternatively,

you can select the “EXPERT” setting for access

to more detailed configuration options.

RDV-1080 DVD Audio/Video Player

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1080 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info