Bedienungsanleitung Rotel rdv 1080 (Seite 25 von 28) (Englisch)

139017

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

To configure the SPEAKER setting:

• On the SPK. SETTING screen, the top

field will be automatically highlighted.

• Press the CURSOR

buttons to choose

the desired setting.

2 CHANNEL: Use this setting when con-

necting to a 2-channel stereo system or a

TV set with only two speakers.

5 CHANNEL: Use this setting when con-

necting to a 5.1 channel amplifier with front,

rear, center, and subwoofer speakers.

EXPERT: This setting is the same as the

5.1 CHANNEL option, except that it gives

access to the additional adjustments grayed

out on the SPK. SETTINGS display. These

allow you to fine-tune the performance of

your surround system, but may require some

expertise to fully understand. See the next

section for instructions on these settings.

NOTE

: If you select 5.1 CHANNEL or EXPERT,

set the DOWN MIX preference to OFF.

NOTE

: The Dolby LFE (Low Frequency Effect)

signal is sent to the Subwoofer output, regard-

less of the speaker setting so you can always

connect a subwoofer to your system.

NOTE

: If you connect the Digital Output to a

surround processor and set the DIGITAL AU-

DIO OUTPUT option to “STREAM/PCM”, the

speaker settings described here are disabled.

Use the settings on the surround processor to

configure your speakers.

EXPERT SPEAKER Settings

These additional options on the SPK. SETTING

page of the PREFERENCES display are only

available if you have selected “EXPERT” for

the top item. Otherwise, these settings are

grayed out.

SPEAKER SIZE Settings:

These are used to tailor the surround sound

audio processing to match your specific speak-

ers. To configure the SPEAKER setting:

• On the SPK. SETTING screen, use the

CURSOR

buttons to move the over

the speaker you wish to configure.

F.SP: front speakers

C.SP: center speaker

R.SP: rear speakers

• Press the CURSOR

buttons to choose

the desired setting:

LARGE: for large speakers which can

handle significant bass energy

SMALL: for speakers which cannot fully

reproduce the sometimes heavy bass of

digital surround sound. This setting redi-

rects low-frequency from these speakers to

those that can better handle it.

NONE: use this setting if you have no

speakers connected in the speaker posi-

tion you are configuring (for example, no

center speaker).

NOTE

: If you set the front speakers to SMALL,

you cannot set the other speakers to LARGE.

BASS REDIRECT Settings:

If you have specified any SMALL speakers in

the previous item, the low frequencies intended

for those speakers will be redirected to either

the subwoofer or to the front speakers, depend-

ing on the setting of this item. If you have not

configured any speakers as SMALL, bass re-

direct is disabled and “NONE” appears in

the setting field.

• On the SPK. SETTING screen, use the

CURSOR

buttons to move the over

the BASS field.

• Press the CURSOR

buttons to choose

the desired setting:

S. WOOFER: redirects bass from small

speakers to the subwoofer.

L/R: redirects bass from small speakers

to the front speakers. If the front speakers

are configured as SMALL, the S. WOOFER

option is automatically selected.

NOTE

: The L/R option is only effective when

playing a Dolby Digital DVD Video disc.

Generally, you should select the S. WOOFER

option.

SPEAKER LEVEL Settings:

You can adjust the relative volume of the speak-

ers in your system. The ideal is for the sound

from the front, rear, center, and subwoofer

speakers to be equal at your listening posi-

tion in order to reproduce surround sound audio

as it was recorded. Alternatively, you can adjust

to suit personal preference.

• On the SPK. SETTING screen, use the

CURSOR

buttons to move the over

the LEVEL field, then press the ENTER but-

ton. The LEVEL field changes color to indi-

cate that the levels can be adjusted.

• Use the CURSOR

buttons to move the

over the speakers you wish to adjust:

F.SP: front speakers (level is fixed at 0db)

C.SP: center speaker

R.SP: rear speakers

S. WOOFER: subwoofer

• Press the CURSOR

buttons to change

the level up or down in 1dB increments be-

tween –6dB and +6dB.

• To exit the LEVEL setting mode, use the CUR-

SOR

buttons to move the back over

the LEVEL field, and press ENTER. The LEVEL

field changes back to its original color.

DELAY Settings:

You can delay the signal from any of the speak-

ers in your system. The ideal is for the sound

from the front, rear, center, and subwoofer

speakers to reach your listening position at the

same time in order to reproduce surround sound

audio as it was recorded. Generally, you in-

crease the delay for speakers located close

to you and decrease the delay for speakers

located farther away.

• On the SPK. SETTING screen, use the

CURSOR

buttons to move the over

the DELAY field, then press the ENTER but-

ton. The DELAY field changes color to in-

dicate the delay settings can be adjusted.

• Use the CURSOR

buttons to move the

over the speakers you wish to adjust:

F.SP: front speakers (delay is fixed at 0ms)

C.SP: center speaker (adjustable in 1ms

increments from 0ms to –5ms)

R.SP: rear speakers (selectable: 0ms,

–5ms, –10ms, and –15ms)

• Press the CURSOR

buttons to change

the delay up or down.

• To exit the DELAY setting mode, use the CUR-

SOR

buttons to move the back over

the DELAY field, and press ENTER. The

DELAY field changes to its original color.

English

Rotel rdv 1080 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info