Bedienungsanleitung Rotel rdv 1092 (Seite 14 von 32) (Englisch)

139018

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RDV-1092

RDV-1092 DVD Audio/Video Player

these TVs should generally be connected with

analog Component Video cables to avoid

an unnecessary digital-to-analog conver-

sion in the TV.

Standard deﬁnition TV monitors should be

connected with one of three types of video

output connections – RCA composite video,

S-Video, or Component Video. On standard

televisions, the S-Video output provides bet-

ter picture quality than the composite video

output.

NOTE: In most systems, only one video con-

nection should be made.

HDTV Connections

Connect the RDV-1092 to a high deﬁnition

TV monitor with HDMI, DVI, or Component

Video inputs. The video resolution can be set

to match the native resolution of the TV monitor

at 480p/576p, 720p, 1080i, or 1080p.

NOTE: Most DVD discs feature Macrovision

and/or HDCP copy protection which may

not display properly at resolutions of 720p

or higher. When using Component

Video connections, set the RDV-1092

output resolution to 480i/576i or

480p/576p. The HDMI connections are

not affected by Macrovision copy protec

tion.

HDMI digital connection

See Figure 3

Use this type of connection with an HDTV

that displays digital signals directly, such as

LCD, Plasma, and DLP monitors.

Connect one end of an HDMI cable to the

VIDEO OUT HDMI connector on the back

of the RDV-1092. Connect the other end of

the cable to the HDMI input connector on the

back of the HDTV or video processor. We

recommend a maximum length of 5 meters

for HDMI cables.

NOTE: The RDV-1092 video output settings

should be conﬁgured to match the native

resolution of the HDTV. See the Video Setup

Menu topic in the Setup section.

DVI digital connection

See Figure 4

Use this type of connection with an HDTV

that displays digital signals directly, such as

LCD, Plasma, and DLP monitors.

Connect one end of an HDMI to DVI cable to

the VIDEO OUT HDMI connector on the back

of the RDV-1092. Connect the other end of

the cable to the DVI input connector on the

back of the HDTV. We recommend a maximum

length of 5 meters for DVI cables.

NOTE: The RDV-1092 video output settings

should be conﬁgured to match the native

resolution of the HDTV. See the Video Setup

Menu topic in the Setup section.

Component Video connection

See Figure 5

Use this type of connection with an HDTV

with cathode ray tube technology, such as

direct view, rear projection, and front pro

jection monitors.

Three cables are required to make Compo

nent Video Connections:

1. Connect one cable from the COMPO

NENT VIDEO OUT connector labeled Y

on the RDV-1092 to the Y input on the TV

or surround processor.

2. Connect a second cable from the COM

PONENT VIDEO OUT connector labeled

PB on the RDV-1092 to the PB input on the

TV or surround processor.

3. Connect a third cable from the COMPO

NENT VIDEO OUT connector labeled P

on the RDV-1092 to the P

R input on the

TV or surround processor.

NOTE: The RDV-1092 video output settings

should be conﬁgured to match the native reso

lution of the HDTV. To avoid Macrovision

copy protection issues with most DVD

discs, set the output to 480i/576i or

480p/576p when using Component

Video connections. See the Video Setup

Menu topic in the Setup section.

SDTV Connections

When connecting a standard deﬁnition TV,

the best picture quality will be achieved using

Component Video or S-Video cables. If the TV

does not have either of these types of connec

tions, use a composite video connection.

Component Video connection

See Figure 5

Three cables are required to make Compo

nent Video Connections:

1. Connect one cable from the COMPO

NENT VIDEO OUT connector labeled Y

on the RDV-1092 to the Y input on the TV

or surround processor.

2. Connect a second cable from the COM

PONENT VIDEO OUT connector labeled

PB on the RDV-1092 to the PB input on the

TV or surround processor.

3. Connect a third cable from the COMPO

NENT VIDEO OUT connector labeled P

on the RDV-1092 to the P

R input on the

TV or surround processor.

NOTE: The RDV-1092 video output settings

should be configured to the interlaced

480i/576i setting with a standard deﬁni-

tion TV. See the Video Setup Menu topic in

the Setup section.

S-Video connection

See Figure 6

Connect one end of an S-Video cable to the

VIDEO OUT S-VIDEO output on the back of

the RDV-1092. Connect the other end of the

cable to the S-VIDEO input on the TV or sur

round processor.

NOTE: The RDV-1092 outputs all S-Video at

480i/576i.

Composite Video connection

See Figure 6

Connect one end of an RCA video cable to

the VIDEO OUT COMPOSITE output on the

back of the RDV-1092. Connect the other end

of the cable to the Composite Video input on

the TV or surround processor.

NOTE: The RDV-1092 outputs all Composite

Video at 480i/576i.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1092 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info