Bedienungsanleitung Rotel rdv 1092 (Seite 27 von 32) (Englisch)

139018

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

2727

English

setting when connecting directly to the TV

monitor or to a 2-channel audio system.

NOTE: This setting only applies to the digital

audio outputs.

Compression

Dolby Digital recordings are capable of wide

dynamic range (the difference between the

softest and loudest sounds). In some cases,

this may tax the audio system. In other cases,

you may want to reduce the dynamic range

when listening at low volume levels so that

dialog is loud enough to hear while prevent

ing sound effects and other dynamic passages

from being too loud.

This setting has no impact on the digital output

of the RDV-1092. It only changes the dynamic

range of the analog signal from the left/right

RCA audio outputs.

• OFF: full dynamic range; no compression

(default).

• 1–5: Five settings reducing dynamic range

for use with less capable audio systems

(such as TV monitor speakers) or late

night listening. The 1 setting is very mild

compression. The 5 setting is maximum

compression.

NOTE: The compression feature only affects

Dolby Digital signals.

Speaker Setup Menu

DVD playback

system setup

video setup

high def. setup

audio setup

speaker setup

parental control

exit menu

speaker size

distance units

speaker distance

The Speaker Setup menu provides three

setup items relating to surround sound and

bass management of the audio signals at the

analog outputs of the RDV-1092.

NOTE: These settings apply only to audio

signals at the analog outputs. They have

no effect on the digital audio output of the

RDV-1092. In addition, these settings only ap

ply to Dolby Digital and DTS decoding.

Many of the settings on this screen conﬁgure

the number and type of speakers in the sys

tem. Speciﬁcally, there are LARGE and SMALL

settings that determine whether deep bass is

reproduced by the speaker connected to a

channel or redirected to a powered subwoofer.

The LARGE setting is “full-range”; the speaker

will reproduce the entire signal including deep

bass recorded in its channel. The SMALL set

ting is “high-pass”; the speaker will reproduce

only frequencies above the crossover point

(100Hz). Bass below the crossover will be

routed to a powered subwoofer connected

to the RDV-1092.

In addition, there are settings for delaying the

signal to the center or surround speakers.

Speaker Size

Use this item to conﬁgure speaker settings

each speaker in the system for the analog

audio outputs. Use the CURSOR buttons

to select the speaker you wish to set: Front,

Center, Surround, or Subwoofer. Then, use

the CURSOR

buttons to choose a set-

ting. Press the ENT button to conﬁrm the set

ting. You can cancel the menu without any

changes by pressing the RESUME button on

the remote.

The options for the Subwoofer are:

• YES: Use this setting if a subwoofer is

connected to your system. The subwoofer

output will carry LFE channel signals from

Dolby Digital and DTS 5.1 channel DVD-

V discs and redirected bass from other

channels conﬁgured as SMALL.

• NO: If your system does not have a sub

woofer, use this setting.

The options for the other speakers (Front,

Center, Surround) are:

• LARGE: This setting sends full-range audio,

including low bass, to the front speakers.

Use with large, full-range speakers when

subwoofer is set to NO.

• SMALL: A high-pass setting that redirects

low bass away from these speakers to

a subwoofer. Use with small bookshelf

speakers when subwoofer is set to YES.

• NONE: Use when there is no speaker for

that position, for example, when there is

no center channel speaker.

NOTE: There is no SMALL option for the front

speakers in a system with no subwoofer.

Distance Units

The following item requires measuring the

distance from each speaker to the listening

position. Use the Distance Unit item to specify

feet or meters as the unit of distance.

• FEET: Specify distance in feet (default).

• METERS: Specify distance in meters.

Speaker Distance

This item allows you to specify the distance

from each speaker to the listening position. The

RDV-1092 uses these distances to delay the

signals so that the sound from each speaker

location arrives at the listener simultaneously.

The maximum distance is 40 feet in 1 foot

steps; 12 meters in 0.1 meter steps.

NOTE: This setting only applies when using

the analog audio outputs and has no effect

on the digital audio outputs. It is primarily

necessary when outputting decoded multi-

channel audio from DVD-A discs to analog

inputs on a receiver.

Use this item to conﬁgure speaker settings each

speaker in the system for the analog audio

outputs. Use the CURSOR

buttons to

select the speaker you wish to set: Left, Cen

ter, Right, Right Surround, Left Surround, or

Subwoofer. Then, use the CURSOR but-

tons to choose a setting in the distance units

speciﬁed previously. Press the ENT button to

conﬁrm the setting. Press the RESUME button

to cancel the menu with no changes.

NOTE: Distance settings are only available for

speakers speciﬁed as being in the system un

der the Speaker Size setting previously.

Parental Control Menu

DVD playback

system setup

video setup

high def. setup

audio setup

speaker setup

parental control

exit menu

assign pass code

enter pass code

change pass code

parental controls

allowed ratings

unrated titles

The RDV-1092 has a Parental Lock feature to

prevent children from watching inappropriate

DVD Video discs. The feature relies on ratings

systems (speciﬁc to each country) that set a

rating level for discs starting from material

suitable for viewing by children and increas

Rotel rdv 1092 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info