Bedienungsanleitung Rotel rdv 1092 (Seite 29 von 32) (Englisch)

139018

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

2929

English

HDMI Color Format

There are three different color space stan-

dards for digital TV monitors: RGB, YCrCb

4:2:2, and YCrCb 4:4:4. Matching the

output of the RDV-1092 to color format is

essential when connecting the monitor with

HDMI cables. Typically, the AUTO setting

will detect the proper format for the digital

TV monitor automatically. If not, use one of

the manual settings:

• AUTO: The DVD player detect information

from the TV Monitor and selects the cor

rect color space automatically. (default)

• RGB: Use when your HDMI connected

digital TV monitor supports the RGB color

format.

• YCrCb 4:2:2: Use when your HDMI con

nected digital TV monitor supports YCrCb

4:2:2 color.

• YCrCb 4:4:4: Use when your HDMI con

nected digital TV monitor supports YCrCb

4:4:4 color.

Enhancement

The built-in video scaler has optional edge

enhancement to increase the sharpness

of the picture at the expense of somewhat

higher video noise. This setting allows you

the choice of using edge enhancement with

softer video images.

• OFF: Turns off edge enhancement (de-

fault).

• LOW: Turns on edge enhancement, with

minimal settings.

• MEDIUM: Turns on edge enhancement,

with moderate settings.

• HIGH: Turns on maximum edge enhance

ment.

MORE INFORMATION

Troubleshooting

If you are experiencing difﬁculties, consult the

following list for possible solutions:

Power

Power does not come on.

• Check that the power plug is inserted se

curely.

Operation

Region Code Error.

• Make sure the Region Code of the inserted

disc matched the code shown on the back

of the unit.

Unit will not work or operates er

ratically.

• Microprocessor malfunction due to light

ning or static electricity. Turn off the power

and unplug the power cord. Connect the

power cord again.

• Moisture condensation caused by a sud

den change of temperature or humidity.

Turn off the power, then turn it on a few

hours later.

• If only one speciﬁc disc will not play, the

disc may be defective.

Remote does not work.

• Check the battery installation, install new

batteries, aim remote at unit.

Picture

Picture is noisy.

• The player is connected to a VCR directly

and the copy guard function is activated.

Connect the player directly to the TV.

Cannot get correct picture on TV.

• Connect the RDV-1092 to the TV with the

correct kind of cable.

• Make sure that the Video Output setting

matches the correct resolution of your TV.

You cannot display progressive scan video

on standard deﬁnition TVs.

• Make sure that the PAL/NTSC setting

matches your TV.

Picture does not ﬁll screen.

• Set ASPECT RATIO correctly.

HDMI LED ﬂashing continuously and

no picture.

• HDMI components must be Ver. 1.1 com

patible.

• HDMI cables must be 5 meters or less in

length.

No picture at Component video.

• Most DVD Video discs are Macrovision,

HDCP compliant. Set the Output format of

High Deﬁnition setup change to Progressive

(480p/576p) or interlace (480i/576i).

Audio

No sound.

• Check the audio cable connection and

input settings on preampliﬁer.

Garbled sound.

• Clean the disc surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1092 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info