Bedienungsanleitung Rotel RSX-1056 (Seite 29 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

• On a 6.1/7.1 system with a DTS-

ES disc. Press the SUR+ button on the re-

mote, then use the +/– buttons to step

through three optional modes: DTS 2.0

channel downmix, DTS 5.1, or DTS-ES

6.1ch/7.1ch playback. On the front panel,

press the DTS Neo:6 button while playing

a DTS source to step through the same

options.

• On a 6.1/7.1 system with a DTS 96/

24 disc. Press the SUR+ button on the

remote, then use the +/– buttons to step

through the optional modes: DTS 2.0 chan-

nel downmix, DTS 96, or DTS 96 with Rotel

XS center back processing. You can also

repeatedly press the DTS Neo:6 button on

the front panel until the desired option is

selected.

MPEG Multichannel discs

MPEG decoding is auto-detected and cannot

be overridden. You may, however, select a 2

channel downmix of 5.1 channel recordings.

If the system is configured with center back

speaker(s), you can also force Rotel XS pro-

cessing on or off.

NOTE

: In addition to the options that follow,

you can press the 2CH button on the remote

to toggle between 2-channel downmix and

multichannel playback.

• On a 5.1 system. Press the SUR+ but-

ton on the remote, then press the +/– but-

tons to change between MPEG 5.1 chan-

nel or MPEG 2.0 channel downmix play-

back.

• On a 6.1/7.1 system. Press the SUR+

button on the remote, then use the +/– but-

tons to step through the optional modes:

MPEG 2.0 channel downmix, MPEG 5.1

channel, MPEG with Rotel XS center back

processing, MPEG with Pro Logic IIx Mu-

sic center back processing, or MPEG with

Pro Logic IIx Cinema center back processing

(available only for 7.1 channel systems).

Selecting MPEG 5.1 forces the center back

channel processing off for conventional 5.1

channel playback. You can also repeatedly

press the DSP button on the front panel until

the desired option is selected.

Digital Stereo discs

(PCM, MP3, and HDCD)

This group of recordings includes any non-Dolby

Digital 2-channel signal from the RSX-1056’s

digital inputs. You can play these recordings

in 2-CH Stereo, Dolby 3-Stereo, 5-CH Stereo,

7-CH Stereo modes. You can also use Dolby

Pro Logic II matrix surround (5.1 ch systems),

Dolby Pro Logic IIx Music (6.1/7.1 ch systems),

Dolby Pro Logic IIx Cinema (6.1/7.1 ch sys-

tems), DTS Neo:6 surround, or one of the

MUSIC 1-4 DSP modes.

All of the bass management settings (speaker

size, subwoofer, and crossover) are in effect

with digital stereo inputs.

NOTE

: In addition to the options that follow,

you can select 2-channel, Pro Logic II Cin-

ema (for 5.1 ch systems), Pro Logic II Music

(for 5.1 ch systems), Pro Logic IIx Music (for

6.1/7.1 ch systems), Pro Logic IIx Cinema

(for 7.1 ch systems), 5-channel stereo, or 7-

channel stereo by pressing one of the sur-

round mode buttons on the remote (2CH, PLC,

PLM, 5CH, 7CH).

• To select any mode for 2-channel

digital recordings. Press the SUR+ button

on the remote, then use the +/– buttons to

step through the optional modes until the

desired mode is displayed.

• To select STEREO mode for 2-chan-

nel digital recordings. Press the 2CH

button on the front panel or remote.

• To select Dolby multichannel modes

for 2-channel digital recordings. Yo u

can also step through the Dolby options

(Pro Logic II, Pro Logic IIx, or 3-Stereo) by

repeatedly pressing the DOLBY PLII/3ST

button on the front panel. You can select

Pro Logic or Pro Logic IIx Cinema or Mu-

sic modes by pressing the PLC or PLM

buttons on the remote.

To change the Cinema or Music option in

Pro Logic II mode, press the SUR+ button

the remote twice while in Pro Logic II or

Pro Logic IIx modes. Then, press the +/–

buttons to select the option.

• To select DTS Neo:6 mode for 2-

channel digital recordings. You can

also step through the DTS options (Neo:6

Cinema or Neo:6 Music) by repeatedly

pressing the DTS Neo:6 button on the front

panel.

To change the Cinema or Music option in

Neo:6 mode, press the SUR+ button the

remote twice while in Neo:6 mode. Then,

press the +/– buttons to select the option.

• To select DSP multichannel modes

for 2-channel digital recordings. Yo u

can also step through the DSP options

(MUSIC 1-4, 5CH, 7CH) by repeatedly

pressing the DSP button on the front panel.

Directly select 5CH mode by pressing the

5CH button on the remote. Directly select

7CH mode by pressing the 7CH button on

the remote.

Analog Stereo

This type of recording includes any conven-

tional stereo signal from the RSX-1056’s ana-

log inputs, including analog audio from CD

players, FM tuners, VCRs, tape decks, etc.

Analog stereo inputs require a choice about

how the signal is routed through the RSX-1056.

One option is the analog bypass mode. In this

mode, the stereo signal is routed directly to

the volume control and the outputs. It is pure

2-channel stereo, bypassing all of the digital

circuitry. None of the bass management fea-

tures, speaker level settings, contour settings,

or delay settings are active. There is no sub-

woofer output. A full-range signal is sent di-

rectly to two speakers.

The other option converts the analog inputs

to digital signals, passing them through the

digital processors in the RSX-1056. This op-

tion allows all of the features to be active in-

cluding bass management settings, crossovers,

subwoofer outputs, contour settings, etc. In this

mode, you can select several surround modes

including 2-CH Stereo, Dolby 3-Stereo, 5-CH

Stereo, 7-CH Stereo modes. You can also use

Dolby Pro Logic II or Pro Logic IIx surround,

DTS Neo:6 surround, or one of the MUSIC

1-4 DSP modes.

Rotel RSX-1056 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info