Bedienungsanleitung Rotel RSX-1056 (Seite 36 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

RSX-1056 Surround Sound Receiver

Main Menu

MAIN MENU

INPUT SPEAKER

DELAY TEST TONE

SUB SETUP ZONE 2

OTHER DEFAULT

CONTOUR

EXIT

The MAIN MENU provides access to OSD

screens for various configuration options. MAIN

MENU is reached by pressing the ENTER button

from the SYSTEM STATUS menu described

above or from most other menus. To go to the

desired menu, move the highlight using the

UP/DOWN and +/– buttons on the remote

and press the ENTER button. Press the MENU/

OSD button on the remote to cancel the dis-

play and return to normal operation.

Configuring Inputs

A key step in setting up the RSX-1056 is to

configure each source input using the INPUT

SETUP screens. Configuring the inputs allows

you to set defaults for a number of settings

including the type of input connector, the desired

surround mode, custom labels that appear in

the displays when a source is selected, and

many more. The following OSD menus are used

to configure the inputs.

Input Setup

INPUT SETUP

LISTEN:CD

VID INPUT:Video 1

INPUT LABEL:_______

INPUT:Coaxial 2

CINEMA EQ:Off

12V TRIGGER:1

DEFAULT MODE:Dolby 3 Stereo

GROUP DELAY:200ms

MAIN MENU

The INPUT SETUP menu configures the source

inputs and is reached from the MAIN menu.

The screen provides the following options, se-

lected by placing the highlight on the desired

line using the UP/DOWN buttons:

LISTEN: changes the current listening input

source (CD, TUNER, TAPE, VIDEO 1–5, &

MULTI INPUT). Changing this input also allows

you to select a specific input for configuring.

VID INPUT: select the video source to be

displayed on the TV monitor with the listen-

ing source specified on the first line. Can be

VIDEO 1–5 or OFF (no video). Typically, the

video source matches the audio from listen-

ing source; however a different video input

can be selected. For audio only sources (such

as a CD player), you would typically specify

OFF so that no video is displayed.

INPUT LABEL: The eight character labels for

the all eight inputs can be customized. Place

the highlight on this line to begin labelling. The

first character in the label will be flashing.

1. Press the +/– buttons on the remote to

change the first letter, scrolling through the

list of available characters.

2. Press the ENT button on the remote to con-

firm that letter and move to the next posi-

tion.

3. Repeat steps 1 and 2 until all eight char-

acters (including blank spaces) have been

completed. The final press of the ENT button

saves the new label.

INPUT: assigns a physical input connection

to use as the default for the source displayed

in the first line of the menu. The options are

ANALOG input, three OPTICAL digital inputs

(OPTICAL 1–3), and five COAXIAL digital in-

puts (COAXIAL 1–5).

When a digital input is the default, the unit

will check for a digital signal when the INPUT

SOURCE is selected. If no digital signal is

present, the unit will automatically revert to the

analog input.

When an ANALOG input is the default, the

unit will not access a digital signal, even though

one may be present at the digital input; thus,

the ANALOG setting forces the unit to use an

analog signal. Assigning a digital input (with

its auto-sensing) is generally the preferred con-

figuration for any source with a digital output.

NOTE

: If a source connected to a digital input

is selected, that signal will automatically be

sent to both digital outputs for recording.

CINEMA EQ: The RSX-1056 includes a CIN-

EMA EQ feature which reduces the high-fre-

quency content of movie soundtracks to simulate

the frequency response of a large movie the-

ater and/or eliminate sibilance. You can turn

the CINEMA EQ on or off as the default set-

ting for the selected input using this menu

choice. In general, this setting should be OFF

for most source inputs, unless you are consis-

tently bothered by excessively bright sound from

movie soundtracks.

12V TRIGGER: The RSX-1056 has three 12V

trigger outputs (labeled 1, 2, and ZONE2) that

supply a 12V DC signal to turn on Rotel com-

ponents and other components as needed. This

menu item turns on specific 12V trigger out-

puts whenever the indicated source is selected.

For example, set up the VIDEO 1 input to turn

on the 12V trigger for your DVD player. The

options for this menu item are: 1, 2, zone, 1+2,

1+zone, 2+zone, ALL, and No.

DEFAULT MODE: The DEFAULT MODE set-

ting allows you to set a default surround sound

mode for each source input. The default set-

ting will be used unless the source material

triggers automatic decoding of a particular type

or unless the default setting is temporarily over-

ridden by the front panel or remote surround

mode buttons.

NOTE

: Default surround modes are stored in-

dependently for the analog and digital inputs

for each source.

Options for the default surround modes are:

Dolby Pro Logic II, Dolby 3 Stereo, Music 1,

Music 2, Music 3, Music 4, 5ch Stereo, 7ch

Stereo, PCM 2 Channel, DTS Neo:6, Bypass

(for analog input only), and Stereo.

NOTE

: The following types of digital discs or

source material are generally detected auto-

matically and the proper decoding activated

with no action or setting required: DTS, DTS-ES

Matrix 6.1, DTS-ES Discrete 6.1, Dolby Digi-

tal, Dolby Digital Surround EX, Dolby Digital

2-channel, MPEG Multichannel, PCM 2-Chan-

nel, PCM 96kHz, MP3, HDCD, and HDCD

96kHz.

Since Dolby Digital 5.1 and DTS sources are

detected and decoded automatically, the de-

fault setting typically tells the RSX-1056 how

to process a 2-channel stereo signal. For ex-

ample, you might have your CD input default

to 2-channel stereo, DVD and VCR inputs default

to Dolby Pro Logic II processing for matrix-

encoded Dolby surround material, and TUNER

input default to one of the MUSIC modes.

In some cases, the default setting can be manu-

ally overridden by the front panel MODE button

or the SUR+ button on the remote. See the

Manually Selecting Surround Modes

section

of this manual for more information on which

settings can be overridden.

Rotel RSX-1056 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info