Bedienungsanleitung Rotel RSX-1056 (Seite 37 von 46) (Englisch)

498117

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

Two of the default surround mode settings

available on this menu offer additional choices.

Dolby Pro Logic II decoding offers a choice

of CINEMA or MUSIC settings. DTS Neo:6

decoding offers a choice of CINEMA or MUSIC

settings. When either Dolby Pro Logic II or DTS

Neo:6 is selected with this menu item, the

current setting choice will also be displayed.

In addition, the function of the ENTER button

changes, taking you to a sub-menu where you

can change the settings and/or additional

parameters for Dolby Pro Logic II or DTS Neo:6

decoding. See the following section for de-

tails.

GROUP DELAY: Also known as “lip-sync”

delay, this setting delays the audio signal for

an input by the specified amount to match the

video input. This feature can be useful when

the video signal is delayed more than the audio

signal as sometimes happens with upconverted

digital TV processors or when trying to match

a radio broadcast with the video from a sports

event.

The range of available settings is from 0ms

to 500ms, in 5ms increments. The setting is

individually stored for each input and is the

default group delay each time that input is se-

lected. The setting can be temporarily over-

ridden from the front panel or the remote.

OPTIONS: This selection is only visible when

Pro Logic II or Neo:6 surround mode is selected.

Highlight this line and press ENTER to go to

submenus with additional options for these

surround modes. See below.

To return to the MAIN menu from the INPUT

SETUP menu (except when Dolby Pro Logic II

or DTS Neo:6 is selected in the SURR MODE

field), press the ENTER button. Press the MENU/

OSD button on the remote to cancel the menu

display and return to normal operation.

Multi Input Setup

INPUT SETUP

LISTEN:Multi Input

VID INPUT:Video 1

INPUT LABEL:_______

12V TRIGGER:1

LFE REDIRECT:On

MAIN MENU

When the MULTI INPUT source is selected on

the INPUT SETUP menu, the available options

change to reflect the fact that these inputs are

direct analog inputs and bypass the RSX-1056’s

digital processing. The INPUT, CINEMA EQ,

and DEFAULT MODE options are not available

since these are all digitally implemented fea-

tures.

The VID INPUT, INPUT LABEL, and 12V TRIG-

GER options are still available and work as

described on the previous menu.

One additional option, LFE REDIRECT, provides

an alternative bass management configura-

tion. Typically, the eight channels of the MULTI

INPUT are configured as pure analog bypass

signals, going straight from the inputs to the

volume control and the preamp outputs, by-

passing all of the digital processing. There are

no crossovers and no bass management; there-

fore, whatever signal goes into the subwoofer

channel will be sent to the subwoofer preamp

output.

This configuration may not be ideal for multi-

channel systems configured with high-pass

speakers, redirecting bass to a powered sub-

woofer. An option, called LFE REDIRECT, sends

the seven main channels directly to the out-

puts as usual. In addition, it takes a duplicate

copy of these seven channels, combines them

into mono, and routes them through a 100

Hz analog low-pass crossover to the subwoofer

preamp output. This creates a summed mono

subwoofer signal, derived from the seven main

channels of the MULTI INPUT.

Use the LFE REDIRECT off for the pure analog

bypass configuration. Use the LFE REDIRECT

on setting to derive the mono summed sub-

woofer output.

Dolby Pro Logic II (x)

DOLBY PRO LOGIC II(X)

MODE:Music

OPTIONAL PARAMETERS

PANORAMA:Off

DIMENSION:3

CENTER WIDTH:0

INPUT SETUP MENU

When Dolby Pro Logic II (x) is selected as the

default surround mode on the INPUT SETUP

menu, there are additional settings and pa-

rameters to optimize the surround decoding

for music or movie soundtracks. Dolby Pro Logic

II uses matrix decoding algorithms to derive

a center channel and surround channels from

2-channel source material.

The first line of the Dolby Pro Logic II (x) sub-

menu selects CINEMA or MUSIC modes for

matrix decoding. Use the +/– buttons on the

remote to select a mode.

Select CINEMA to optimize for Dolby Surround

encoded movie soundtracks including in-

creased surround separation and full-bandwidth

surround channel frequency response.

Select MUSIC to optimize for musical record-

ings. When the MUSIC mode is selected, three

additional parameters will be available on the

OSD screen. Use the UP/DOWN buttons on

the remote to select a parameter. Use the +/

– buttons to change the selected parameter

as follows:

• PANORAMA: The Panorama option

extends the front stereo image to include

the surround speakers for a dramatic “wrap-

around” effect. The options are OFF or ON.

• DIMENSION: The Dimension option al-

lows you to gradually adjust the soundfield

towards the front or towards the rear. There

are seven incremental settings from 0 to

6. A setting of 0 shifts the soundfield to-

wards the rear for maximum surround ef-

fect. A setting of 6 shifts the soundfield to

the front for minimum surround effect. The

default setting of 3 provides a “neutral”

balance between the two extremes.

• CENTER WIDTH: The Center Width option

allows you to spread the signal intended for

the center speaker to the left and right front

speakers, widening the perceived soundfield.

There are eight incremental settings from 0

to 7. With the default setting of 0, there is

Rotel RSX-1056 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info