Bedienungsanleitung Rotwild 2014 (Seite 34 von 52) (Deutsch, Englisch)

656106

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

33ROTWILD USER MANUAL | 2014

Handlebar height

• In order to adjust the handlebar height

one has the possibility on the one hand to

diversify the Spacer number which is to be

found under the stem, or on the other hand to

turn the mounting stem. The mounted stem

on your ROTWILD road bike features an incli-

nation and can, as well as facing downwards

(sportive deep sitting position), be mounted

facing upwards (comfortable siting position).

• It is necessary to disassemble the complete

stem handlebars device in order to position

the handlebars height. Please contact a qua-

lified dealer’s workshop. A crash or accident

could occur due to faulty mounting of the

stem-handlebars device, in which you and/or

others could come to harm.

Angle of handlebar

• To set the angle of the handlebar, the clamp

screws on the handlebar stem have to be

loosened slightly and the handlebar turned in-

to the right position. The ideal riding position

is when your hands rest casually on the brake

lever unit in the riding position. Please always

make sure that you refasten the clamping

screws after setting the angle of the handles,

using the torque wrench – fastening torque 6

Nm. Follow the instructions above.

• Before fastening the handles again, please

make sure that it is clamped exactly in the

centre of the handlebar stem. Fasten the screw

connections on the handles securely – take

care that you do this evenly so that the clamp

openings at the top and bottom are the same.

Use a torque wrench for this purpose. Fasten-

ing torque 6 Nm.

• If you find during your first test ride that the

turning of the handlebar stem or handles is not

ideal, repeat the procedure described above.

Falls or accidents

Please note that handlebars and stems are

essential parts of bicycle construction. Any

modifications to these parts may endanger your

safety. Be sure to use the correct torque when

tightening screws. The wrong torque could

result in parts working loose or breaking during

a ride. This can lead to serious accidents.

Potential accident risk

To avoid losing control of your bike and injuring

yourself and/or others in an accident or fall,

please take note of the following points:

• Always make sure your bike is in perfect

technical condition.

• Make sure you are familiar with every aspect

of your ROTWILD bike.

• Always observe traffic regulations and the

laws of the country in which you are cycling.

• Do not ride where you cannot be seen by

other road users. Avoid the blindspot of

vehicle drivers.

• Remember that the manoeuvrability of bikes

may surprise other road users, and always

remember that other road users make

mistakes too.

• Develop a defensive cycling style and match

your behaviour to traffic conditions.

• Always keep both hands on your handlebars

– this ensures safe and fast reactions to

dangerous situations.

GETTING READYV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotwild 2014 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info