483581
3
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
110 346 7664 Index 01
Rowenta Werke GmbH, 63016 Offenbach am Main
PROFESSIONAL
Please read carefully the instructions for use and
the Safety Points to Note. Pay particular attention
to the fold-out page with the illustrations.
Bitte lesen Sie diese Gebrauchsanweisung und
die Sicherheitshinweise aufmerksam durch.
Beachten Sie dabei die Abbildungen auf der
ausklappbaren Bildseite.
Lire attentivement le mode d’emploi (et le con-
server pour pouvoir le consulter). Pendant la
lecture, dépiller la page avec les illustrations.
Leggere atteritamente le presenti istruzioni per
l’uso e le norme di sicurezza. Osservare la figura
sui risvolli illustrati.
Lea en su totalidad el modo de empleo, conser-
vándolo para consultas posteriores. Para su
lectura, abra por la página ilustrada.
E favor ler com toda a atenção estas instruções
de serviçio, assim como as instruções de segu-
rança. Sera convenlente consultarem se as
figuras que se encontram nas página ilustrada
desdobraveil.
oayca, aeo poae y
cpy o cyaa  opae ocooe
ae a paa ex eoacoc.
o epe e o cpy opao
ae a pcyo, opae a
ypeo copoe coeo pop.
page
1
Seite
5
page
9
pagina
13
pág.
17
pag.
21
ctp.
25
GB
D
F
I
E
P
RF
Umschlag-DX8000-7spr 22.10.2004 9:08 Uhr Seite 1
B
E3
2
E4
2
7
E5
1
PROFESSIONAL
Umschlag-DX8000-7spr 22.10.2004 9:08 Uhr Seite 2
1
English
Safety instructions
Dear customer,
thank you for purchasing this appliance. Please read the operating instruc-
tions carefully and keep them in a safe place.
Before use
BEFORE DOING ANYTHING ELSE, REMOVE THE SOLEPLATE PROTECTOR.
Before using the iron for the first time:
Heat the appliance at the maximum setting without water (see D).
A little smoke and a slight smell may be emitted, but this is only tem-
porary. The water tank can then be filled directly with untreated tap
water using a jug (see C).
Each time you begin ironing, allow the iron to emit steam for at least
the first 1 minute. During this time press the power steam button from
time to time to release several bursts of steam. Any particles released
through the soleplate during first use are harmless and are due to
the newness of your iron.
The appliance complies with EU directives 72/23/EEC and 89/336/EEC.
The appliance may only be connected to alternating current as
specified on the rating plate.
An electrical appliance is not a toy. Use and store the appliance out of
reach of children. Do not let the supply cord hang down.
Do not leave the appliance unattended while it is connected to the
mains supply.
Electrical appliances generate high temperatures. Always use the
handles provided and warn other users of the potential dangers (e.g.
escaping steam or hot water, especially when ironing vertically).
Never iron clothing which is being worn.
Always disconnect the appliance:
– before filling or emptying the water tank;
– before leaving the room (even for a short time);
– after use.
Never unplug the appliance by tugging on the cord.
Only use an extension lead or cord reel which is rated at 10A or
greater and has an earth.
Do not immerse the appliance in water.
An electrical appliance should not be used if:
– the appliance, the supply cord or the cord protector is damaged;
– the appliance has been dropped;
– the appliance is obviously leaking. In this case the appliance should
be returned to an approved Rowenta Service Dealer for repair. (See
enclosed list for addresses.)
Repairs to electrical appliances may only be carried out by specialists.
Improperly carried out repairs can cause serious danger to users. To
avoid danger to users, a defective or damaged supply cord may only
be replaced by an authorised Rowenta service centre.
This product has been designed for domestic use only. Any commercial
use, inappropriate use of failure to comply with the Instructions, the
manufacturer accepts no responsibility and the guarantee will not apply.
When the appliance has reached the end of its operational life it
should be disposed of through the correct channels.
B
Appliance description
1 Spray button
2 Extra Long Shot button
3 Variable steam control with
Self Clean Function and Dry
Position
4 Thermostat light
5 Temperature control dial
6 Water filling inlet with cover
7 Spray nozzle
8 Mains supply cord
9 Flexible cord support
10 Water tank with maximum
water level indicator
11 Soleplate
12 Automatic switch-off indicator
light (depending on model)
A
DX8000-7spr 21.10.2004 10:29 Uhr Seite 1
5
Deutsch
Sicherheitshinweise
Liebe Kundin, lieber Kunde,
herzlichen Glückwunsch zum Kauf dieses Gerätes und vielen Dank für Ihr
Vertrauen. Die Gebrauchsanleitung bitte sorgfältig lesen und aufbewahren.
Produktbeschreibung
A
1 Spraytaste
2
Taste für extra langen Dampfstoß
3 Dampfregler mit Self Clean
Funktion und Dry Position
4 Kontrolllampe
5 Temperaturregler
6 Einfüllöffnung mit Abdeckung
7 Sprühdüse
8 Netzzuleitung
9 Knickschutztülle
10 Wassertank mit Anzeige
für maximale Füllhöhe
11 Sohle
12 Anzeige für Abschaltautomatik
(je nach Modell)
Das Gerät entspricht den EU-Richtlinien 73/23/EWG und 89/336/EWG.
Gerät nur an Wechselstrom gemäß der Typenschildaufschrift
anschließen.
Bei Haus-/Wohnungsinstallationen mit einer Fehlerstrom-Schutz-
schaltung, bitte sicherstellen, dass es sich um einen pulsstrom-
sensitiven Schutzschalter handelt.
Gerät nicht unbeaufsichtigt lassen, während es am Netz angeschlos-
sen ist.
Gerät außer Reichweite von Kindern benutzen und aufbewahren.
Das Bügeleisen und austretendes Wasser und Dampf sind heiß.
Benutzen Sie die vorgesehenen Griffe.
Dampf nicht auf Personen und Tiere richten oder am Körper befind-
liche Kleidungsstücke behandeln.
Vor jedem Befüllen und Entleeren sowie nach dem Gebrauch und vor
Reinigung und Pflege den Netzstecker ziehen.
Stecker nicht an der Leitung aus der Steckdose ziehen.
Gerät nicht ins Wasser tauchen.
Nehmen Sie das Gerät nicht in Betrieb, wenn:
– das Gerät, die Zuleitung oder Knickschutztülle defekt oder
beschädigt sind.
– das Gerät heruntergefallen oder undicht ist.
Das beschädigte Gerät an eine Rowenta Kundendienststelle schicken
(Adressen siehe Servicespiegel). Reparaturen sowie Austausch von
Zuleitungen dürfen nur von Rowenta Kundendienststellen durchge-
führt werden, um Gefährdungen zu vermeiden.
Wird das Gerät zweckentfremdet oder falsch bedient, kann keine
Haftung für einen eventuellen Schaden übernommen werden.
Am Ende der Lebensdauer das Gerät ordnungsgemäß entsorgen.
Vor dem Gebrauch
ENTFERNEN SIE ZUERST DEN SOHLENSCHUTZ!
Vor dem ersten Bügeln:
das Gerät ohne Wasser auf höchster Stufe aufheizen lassen (siehe
Punkt D). Es kann zu leichten Rauch- und Geruchsbildungen kom-
men, die schnell vorüber gehen.
Anschließend kann der Wassertank befüllt werden (siehe Punkt C).
Das Bügeleisen nach dem Befüllen und Aufheizen mindestens
1 Minute dampfen lassen und dabei gelegentlich die Dampfstoßtaste
drücken, um evtl. Fertigungsrückstände in der Sohle zu beseitigen.
B
DX8000-7spr 21.10.2004 10:29 Uhr Seite 5
2
Filling the water tank
Before filling the water tank, unplug from the mains and set the steam
control to the Dry position .
To open the water filling inlet, push the cover downwards, tilt the iron
and pour in untreated tap water up to the maximum level ( ). Close
the cover before holding the iron horizontal again.
What water may be used?
Your iron has been designed to operate using untreated tap water.
However, if your water is very hard, you can mix it 50% tap water with
50% distilled or demineralised water.
Do no add anything to the contents of the water tank and do not use
water from clothes dryers, scented or softened water, water from refri-
gerators, batteries or air conditioners, pure distilled water, rain water,
boiled water, bottled water or filtered water. These contain organic
waste or mineral elements that become concentrated when heated and
cause spitting, brown staining or premature wear to your iron.
Tip: Spray starch onto the reverse side of the fabric to be ironed to
avoid stains on the soleplate.
Setting the temperature
Using the temperature control ( ), set the iron temperature to suit the
type of material. We recommend using the above table as a guide. The
thermostat light ( ) indicates that the soleplate is heating up. When
the light goes out, the required temperature has been reached.
Please note: When heating up the iron from cold, wait until the ther-
mostat light has gone out a second time. Only then is the set
temperature reached.
Tip: We recommend that you start with fabrics to be ironed at a low
temperature as the iron takes longer to cool down than to heat up.
For mixed fabrics set the temperature for the most delicate fabrics.
Ironing and Steam functions
E1 Ironing with Dry Position (without steam)
To iron without continuous steam and for perfect finishing results turn
the steam control ( ) to the Dry Position . It will engage with a
“Click”. Set the temperature to suit the type of material
(care points
, •• or •••).
E2 Steam ironing
You can iron with continuous steam by setting the temperature dial
( ) in the marked steam zone (after
••
). The steam quantity can be set
between minimum (see drawing E2, smallest dot) and maximum
steam . We recommend setting to maximum steam quantity only
when the iron is at maximum temperature setting to avoid droplets of
water leaking from the soleplate.
E3 Extra Long Shot button (temperature setting at maximum)
Your iron is equipped with a new special Extra Long Shot, which
allows you to iron out creases perfectly, specifically on dry and thick
fabrics. By pressing the Extra Long Shot button ( ) steam is pushed
with more pressure into the fabrics, because of this new technology.
The steam reaches a bigger area and penetrates much deeper into
fabrics. So you get excellent results from your ironing.
The pressure generated may cause a slight noise. This is not a
technical fault!
The Extra Long Shot (E3) is also possible to use if the steam control is
set to the Dry Position .
Ironing label Fabric
Synthetic fibres e.g.
viscose, polyester
silk, wool
cotton, linen
Temperature control
C
D
E
DX8000-7spr 21.10.2004 10:29 Uhr Seite 2
3
E4 Vertical steam ironing (steam control setting to )
Ideal for removing creases from suits, jackets, skirts, hanging curtains etc.
Important!
Never steam or iron clothing that is being worn!
• Hang the garment on a hanger
• Set the thermostat control to maximum
• Hold the iron a few centimetres away from the garment to avoid
burning delicate fabrics
• Press the extra long shot button repeatedly (maximum every
2 seconds), moving the iron from top to bottom
You should allow approximately 2 seconds between each burst of steam.
Important: Never direct the steam at persons or animals!
Do not touch delicate fabrics with the hot soleplate!
E5 Spray function
To dampen stubborn creases, press the spray button ( ) .
Additional functions
F1 Self Clean – prolongs the life of the iron
The Self Clean function flushes dirt and scale particles out of the
steam chamber.
To operate:
• Fill the tank with untreated tap water up to the maximum mark and
heat the iron to max. temperature for 2 minutes.
• Unplug from the mains.
• Hold iron over a sink horizontally, push the steam control past the
position and into the Self Clean position and hold it there: steam will
now begin to build up. After a few seconds water and steam will
emerge from the soleplate, rinsing impurities and scale particles out
of the steam chamber.
• After approx. 1 minute move the steam control slide to the position.
• Insert mains plug and allow the iron to heat up again.
• Wait until the remaining water has evaporated.
• Unplug from the mains and allow iron to fully cool down.
• When cool, the soleplate can be wiped with a damp cloth.
We recommend using the Self Clean function approx. every 2 weeks.
If your water is very hard, the iron should be cleaned weekly.
Self Clean Valve
The self clean valve prevents the drip hole into the steam chamber
from furring or blocking up. To ensure the iron continues to function
properly, open and close the valve by sliding the steam control to max
then min a few times after use.
F2 Anti-scale system (depending on model)
Your iron contains an anti-scale cartridge to reduce scale deposits. This con-
siderably prolongs the operational life of your iron. The anti scale cartridge is
an integral part of the water tank and does not need to be replaced.
Do not use descaling agents, as they will damage the lining of the
steam chamber and so may impair the steam function.
F3 Anti-Drip System (depending on model)
If the temperature is set too low, the iron cannot produce steam
because of the anti-drip technology which prevents droplets of water
leaking from the soleplate.
F4 Electronic 3-stage automatic switch-off (depending on model)
If the iron is switched on and not moved for a period of 8 minutes
while standing on its heel or 30 seconds while standing on the sole-
plate or lying on its side, an internal safety feature will switch the iron
off and the automatic switch-off indicator will blink. Move the applian-
ce sharply to switch it on again.
After ironing
• Unplug from the mains, pour away remaining water and set steam
control to . Then allow the appliance to cool down.
• Do not wind the cord round a hot soleplate.
• Store the iron standing on its heel.
Cleaning and maintenance
When cool, the iron and the soleplate can be wiped with a damp cloth.
Do not use corrosive or abrasive cleaning agents or sharp objects to
clean the soleplate. Depending on the model, if the soleplate is stainless
steel it can be cleaned using a Rowenta Soleplate Cleaning Stick.
F
G
H
DX8000-7spr 21.10.2004 10:29 Uhr Seite 3
4
Important:
If the appliance has been standing unused for long periods, hold it
horizontally and allow it to emit steam for 1 minute to clean the
steam ducts and remove any residue from the iron.
Problems?
If you have any further problems or queries with our products please
call our Customer Relations Team first for expert help and advice:
HELPLINE: 0845 602 1454 – UK (01) 4751947 – Ireland
Or consult our website: www.rowenta.uk
In line with a policy of continuous product improvement Rowenta
reserves the rights to change product specifications without prior
notice.
Problem
No power supply.
The temperature con-
trol is on position “0”
or set too low.
This is normal.
The steam control is
set on position .
There is insufficient
water in the tank.
The Anti-Drip function
is active (depending
on model).
You are using chemi-
cal descaling agents.
Pure distilled/demine-
ralised or softened
water is being used.
Your linen is not rin-
sed sufficiently or
your have ironed a
new garment before
washing it.
You are using a too
high temperature.
You are using starch.
Overuse of extra long
shot of steam button
You have placed your
iron flat on a metallic
rest plate.
You have ironed over
a zip.
Check that the mains plug is
properly inserted or try plug-
ging the iron into a different
socket.
Turn the temperature control
to the required setting.
When the thermostat light goes
on and off, the iron is heating
up. As soon as the light goes
off, the steam temperature has
been reached.
Turn the steam control to the
required setting area.
Fill the tank (C).
Wait for the soleplate to reach
the correct temperature.
Do not add any descaling
agents to the water in the
water tank.
Only use untreated tap water
or mix half tap water with half
distilled/demineralised water.
Ensure linen is rinsed thoroug-
hly to remove any soap depo-
sits or chemicals on new gar-
ments which may be sucked
up by the iron.
See the temperature table to
correctly set the thermostat.
Clean the soleplate as indicated
in section H. Always spray starch
onto the reverse side of the fabric
to be ironed.
Allow more time between
each burst.
Always set the iron on its
heel.
Try to avoid ironing over zips
which may have rough edges.
Possible cause Solution
The soleplate
does not heat up
or the thermostat
light does not
come on.
Thermostat light
goes on and off.
None or too little
steam is being
emitted.
Brown streaks
come through
the holes in the
soleplate and
stain the fabric.
The soleplate is
dirty or brown
and can stain the
linen.
Iron is leaking.
The soleplate is
scratched or
damaged.
I
DX8000-7spr 21.10.2004 10:29 Uhr Seite 4
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rowenta DX8300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info